electric towel warmer sterilizer in Beauty&Personal Care

Specifications

Towel Drying disinfection sterilizing Machine
1.Towel sterilizer
2.towel Disinfection & Drying
3.new technology
4.OEM

This machine is specifically for salons, beauty industry characteristics, which take used of the automatic thermostat that is advanced and safety & environmental protection, and the gas heating technology of non open fire, combining with the durothermic space reflective film, that the temperature is highly concentrated, and the maximum temperature inside can reach 130-140 ° C which can quickly steam the moisture in the towel to dry and sterilize. The machine is small and does not account for the site, and it is a cabinet with safe corner which is made of stainless steel and without solder joints, beautiful and practical. It is the most professional drying and sterilizing equipment in hair salon field.

How to use:

At first, mechanically dehydrate the towel which is prepared for drying and sterilizing, as the water in the towel is double less by mechanical dehydration than it is made by hand, that it will greatly shorten the time to achieve the purpose of energy-saving quick drying. (According to the experimental data, the evaporation of one kg of water needs a kilowatt of electricity an hour to complete)

1. After dehydration of the towel, open the door more than 90 degree, pull out the towel rack rails, hung the towel (this machine is able to hang up 12 pieces of towel), push the rack, and close the door.
2. Insert the power, press the power switch, power-on indicator light, the indicator light will be light, then select the drying time, reverse the knob according to the clockwise to select the time (mechanical dewatering towel, take 25 - 30 minutes, dry towel by hand needs 60 minutes or even longer, extend the drying time as the water in the towel). Drying timer indicator lighten, heating starts work, and cabinet quickly heat up to 130 ° -140 °.
3. After drying time is complete, timer light will be off, while there is ring tones occurred, and turn off the heat source of constant temperature automatically. Can not immediately open the door the, so as to avoid burning by high-temperature. The supply fan will continue to work for cooling, after 5-10 minutes until the cabinet temperature drop, turn off the power, open the door to pull out the rack, remove the towel, and the work is completed.

 

Note:
1. (a).Strictly prohibited using all the time; (b).If no use for long periods, keep the machine off; (c).In case of damage for power cord and the machine power supply, contact the manufacturer or the specified repair point by factory, do not self-boot repair.
2. Do not put other items that cannot bear temperature above 120 ° into the cabinet in order to avoid deformation or damage.
3. In the process of drying and disinfecting, the cabinet door is prohibited to open, which not only affects the drying effect, but take longer working time. At the same time, may result in burning by the high-temperature.
4. When the drying time is made, timer indicator is irreversible, so as not to damage the timing device.
5. No close to the humidity outlet with high temperature at the top of machine, to avoide burning. No other article at the top of the cabinet to prevent blockage and coverage of humidity exit.
6. After the power is turned on, in case of fan failure and fan soundless, please do not continue to turn the drying timer, shall promptly turn off the power and send to be repaired.
7. Regularly remove the dust gauze in the wind shield to clean, in order to prevent dust clogging the air inlet to affect the drying effect.