Handheld Rugged PDA Laser Barcode Scanner Terminal with Display,RFID Reader,2D,1D,WiFi,GPS

CPU: Samsung S3C2440A,Clocked at 400MHZ
SDRAM memory(low-power MCP):64 Bytes SDRAM; 32bit data bus;SDRAM clock frequency up to 100MHZ
Flash Storage(low-power MCP): 128 Bytes SLC NandFlash
Operating System: Microsoft WinCE 5.0
Stereo: Dedicated low power audio codec chip ALC5620 High-performance stereo speaker output Stereo headphone output.
Screen:Support for Touch Input
240×320 ,65K Colors,3.2 inch QVGA Display panel
Keyboard:28 keys,4 side keys and F1/F2/F3/F4 function keys can be customize as self-define functionality.
User interface:USB, could switch to serial port,PSAM card slot,SIM card SD card Slot, Extensions IO(including 10PIN, TTL Comm).
RFID:Low-frequency : 125K
High-frequency: 13.56M, Support ISO1443A/B/15693,M1 Card,Desfire Card, CPU Card
UHF: 902-928M,ISO18000-6C(EPC?G2)or ISO-18000-6B PSAM card,Support PSAM9600,PSAM38400 baudrate
Barcode Reader:One-Dimensional Barcode Reader,Symbol SE955
Two-Dimensional Barcode Reader,Symbol SE4500
Camera(30W,300W Optional)
Wireless Communication:Wifi, Mavell, Standard High-Speed SPI Interface Bluetooth, Protocol Version 2.0 GPS Positioning GSM/GPRS(850,900,1800,1900MHz)SIM900D EVDO,CDMA2000 3G Network
Power Supply: build-in power management module, power by Li battery;3mA ultra-lower standby current;300mA charging current
Charging Circuit:USB Charging or 5V Adaptor
Software:pre-installed software and device drivers to meet the requirements of rapid development

PM-8001  IO Extended definition

 Installing Battery

    Figure 2-1-1                    Figure 2-1-2                   Figure 2-1-3

Steps of installing battery:

1) push rear cover lock to the unlock position(See Figure 2-1-1)

2) take off rear cover.(See Figure 2-1-2)

2) put in  battery(See Figure 2-1-3)

3) lock rear cover

Battery Charging

The device has two charging methods: use AC adapter or USB cable. 

1) Plug the AC adapter into 220V AC Power Supply for Charging(See Figure 2-2-1) 

2) Plug the USB Cable directly into the Computer’s USB port for Charging(See Figure 2-2-2)

                Figure 2-2-1                                     Figure 2-2-2

Device and OS Troubleshooting