Home > Products > New Products > UHMWPE wear strip used on conveyor impact bar/conveyor belt impact bar/UHMWPE impact bars belt conveyors
UHMWPE wear strip used on conveyor impact bar/conveyor belt impact bar/UHMWPE impact bars belt conveyors
- 5000 Ton / Tons per Month
- Qingdao/Tianjin
- T/T
Product Details
Place of Origin: | Shandong, China | Brand Name: | XINXING | Model Number: | Plastic Sheet |
Material: | PE | Thickness: | 1-300mm | Size: | as your requirement, 100X75mm,any length you want |
Product Description
UHMWPE wear strip used on conveyor impact bar/conveyor belt impact bar/UHMWPE impact bars belt conveyors
Features:
No moving parts, no lubrication ; hence zero maintenance
Extremely low coefficient of friction
High Abrasion resistant
Shock absorbing
No belt sagging, no belt mistracking
Protect belt from tear and puncture
Reduces spillage
Friendly with the side skirt sealing system as it eliminates the gap which occurs commonly between two conventional impact idlers
Impact bed specifications
1. UHMWPE surface with extremely low coefficient of friction
2. Replaceable impact bar
3. Extend Belt Life
4. Abrasion-resistant UHMW
Impact Bar and Impact Bed Conveyor Belt Support System:
The impact bar is a combination of three different layers. The top layer is made of UHMWPE for smooth movement of belt, thanks to its low dynamic co-efficient of friction.
The middle layer is of rubber to cushion the impact load while the lower layer is made of aluminum, which actsas a fastening device with the main support frame or cradle.
The cradlers are custom built to suit specific applications. The installation of impact bar is made is such a way that the belt is not in touch with the bar when running empty. The belt comes in contact with the bar only when it is running under loaded condition.
Impact bars and impact bed are made up of a cast aluminium T-slotted base covered in a solid block of 60 shore hard rubber with a 10mm polyethylene(PE) top.
Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. Its designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure.
UHMWPE wear strip used on conveyor impact bar
Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. Its designed to absorb impact loading which will dramatically reduce shock and stress loading to the structure
Specifications
Our impact cradle of belt conveyor feature:
The UHMW polyethylene surface has outstanding sliding properties.
Eliminates belt sagging and ensures optimum sealing with the skirting rubber.
Integration profiles enable easy and quick mounting with special bolts.
Cushions Impact To Prevent Damage
Adjustable Supports Make Installation Easy
Eccentrics in wing supports allow outer bars five degrees of wear adjustment.
Simple impact bars are each secured with special T-Bolt. Meets stanards for all serial belt conveyor trough and return idlers. Engineered to your conveyors as the actual conditions.
UHMWPE Impact Bars
Impact bar is used in the loading area of the belt conveyor to replace the traditional cushion rollers. The loading zone of a conveyor is a critical area. The type and size of material as well as height of drop are the main factors causing damage not only to belt but also the rubber rings and bearings of the conventional impact idler rolls.
The impact bar is a combination of three different layers. The top layer is made of UHMWPE for smooth movement of belt, thanks to its low dynamic co-efficient of friction. The middle layer is of rubber to cushion the impact load while the lower layer is made of aluminum, which acts as a fastening device with the main support frame or cradle. The cradlers are custom built to suit specific applications. The installation of impact bar is made is such a way that the belt is not in touch with the bar when running empty. The belt comes in contact with the bar only when it is running under loaded condition.
Used in the conveyor loading points or transfer points to replace traditional cushion rollers. It’s designed to absorb impact loading and help eliminate spillage and scattering of the products. This results in less wear and tear on your conveyor system, dramatically improves the efficiency and reduces the maintenance cost.
About our company :
XINXING is the leading manufacture for Engineer plastic like UHMWPE ,HDPE ,PP ,PVC in China for nearly 20 years with the most competitive price and best quality .We can supply UHMWPE,HDPE ,PP ,PVC ,POM Sheet /rods/parts and now 70% of our production have exported to all over the world like America,Europe ,Russia ,Australia and South Asia .XINXING is the only manufacture in China that have ever cooporated with the mostforeign goverment companies.
Characters:
1. Non-Toxic and smell
2. Low coefficient of friction
3. Corrosion resistant
4. Abrasion and impact resistant
5. Anti-Weather and Anti-Aging
6. Self-lubricating
7. Wear Resistant
8. Great liner material for industrial material handling applications
9. UV Resistant/ultraviolet-resistance sheet
10. High Operating Temperature
Advantages:
1. Avoids the damage to the belt through the contact between the bar and surface of belt.
2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material causedby inequality of the stress on the belt.
3. The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum.
4. Ultra elastic rubber absorbs the impact in the maximum.
5. Each part of the impact bar is closely jointed by hot vulcanization.
6.“T-track” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.
Features:
1. Surface contact between impact and belt let stress evenly spread on belt;smooth surface of UHMWPE board makes friction lowest, effectively weaken damage to belt, dramatically reduce daily maintenance coat and increase production rate
2. Effectively eliminate the spillage and scattering of the material caused by uneven stress on the belt
3. Guiding angle on UHMWPE board of impact bar guarantee belt running smoothly
4. Ultra elastic rubber can absorb impact in maximum
5. Each part of impact bar is closely jointed by hot vulcanization
Main Properties
Excellent Abrasion-resistance
Good self-lubrication and low coefficient of friction
High anti-impact strength and good toughness
Good chemical corrosion resistance can resist almost all mediums such as acid,alcli and salt,but except for concen trated sul-phuric-acid,concentrated nitric and a few organic solvents.
Inodorous,in noxious and impenetrable
Good conductibility and ultra-low water absorbability
Good anti-environmental stress breakage property which is 200 times of ordinary ethylene
Good cold resistance property which isnit brittle even if at 176°Cbeiow zero.
UHMW-PE (ultra high molecular weight polyethylene) is an extremely tough and abrasion resistant thermoplastic that is used for applications that require durability and/or abrasive wear resistance.
UHMW plate is often used for lining chutes and hoppers in order to protect metal surfaces and promote the flow of solid materials such as sand, wood chips, or coal.
UHMW (aka UHMW-PE) (PE1000) offers a combination of excellent properties – outstanding abrasion resistance, superior impact resistance, non-sticking and self-lubricating properties and excellent mechanical properties, even in cryogenic conditions. UHMW Sheet, Rod, Tube and Profiles reduces noise from impact & vibration. It is a self-lubricating material that is chemical, corrosion, and wear-resistant. UHMW is also available in several filled grades including higher-temperature, ceramic-filled, conductive and ESd versions.
1. Extremely tough and durable
2. Low friction
3. Excellent abrasion resistance
4. Good chemical resistance
5. Low moisture absorption
6. Easy to fabricate
Key properties of UHMWPE/HDPE wear resistant parts:
Extremely high impact strength
Excellent wear and abrasion resistance
Optimal sliding properties
Dimensional stability
Energy absorption capacity at high loading rates
Resistance against fatigue
Water repellent
Good chemical resistance
Excellent electrical and dielectric properties
uhmwpe cutting spacer set, uhmwpe pipe support block, UHMWPE block/HDPE Pipe support block
Conveyor rubber impact bar for belt conveyor loading point is a fusion of three different layers:
•UHMW pe cap
•Cushioning rubber or urethane
Alumimium insert or steel insert.
An impact bar is a special mechanical device that distributes the load of an impact over a wide surface area. The bar is made with a special rectangular design that forces any impacted weight to be distributed of the entire surface area of the bar. These types of bar designs are often used in safety equipment for automobile doors, bumpers, and roll cages. They are also used as weight support for conveyor belts.
Many cars and trucks include impact bars throughout the passenger compartment. These safety devices enclose the occupants with bars in the doors, bumpers, and roof. The bars make the car safer for collisions and rollover accidents.
An automobile bumper is typically based on an impact bar design. Bumpers reduce damage to the car and occupants by limiting the explosive effects of a collision. The bar has in internal rectangle cut-out area that is designed to spread the load of impact across the entire beam. This makes it easier to support heavy loads during crashes.
Impact bars are available in many types of material. The most frequently used are rubber, metal, or hardened urethane. The type of material determines the weight and distributed load the barcan support. An impact bar made from hardened urethane is considered one of the most durable because it is more resistant to wear.
Features:
1. Surface contact between impact and belt let stress evenly spread on belt;smooth surface of UHMWPE board makes friction lowest, effectively weaken damage to belt, dramatically reduce daily maintenance coat and increase production rate
2. Effectively eliminate the spillage and scattering of the material caused by uneven stress on the belt
3. Guiding angle on UHMWPE board of impact bar guarantee belt running smoothly
4. Ultra elastic rubber can absorb impact in maximum
5. Each part of impact bar is closely jointed by hot vulcanization
Features:
1. Avoids the damage to the belt through the contact between the bar and surface of belt.
2. The conveyor belt is stressed evenly in the loading area, which will reduce the daily maintenance cost. It effectively eliminates the spillage or scattering of the material caused
by inequality of the stress on the belt.
3. The UHMW polyethylene surface has outstanding sliding properties, to reduce the frictional resistance to the minimum.
4. Ultra elastic rubber absorbs the impact in the maximum.
5. Each part of the impact bar is closely jointed by hot vulcanization.
6.“Ttrack” fastening device has different tightening points along the bar and make the joining strong and reliable, easy to install and remove.
The impact bar is composed of ultra-high molecular weight polyethylene,rubber elastomer and Aluminum alloy framework,each part of them is closely jointed by hot vulcanization
Technical parameter
1.Surface material of impact bar: Ultra-high molecular weight polyurethane(UHMWPE)
1.1 Tensile Strength: > 25N/mm2
1.2 Elongation: > 350%
3Impact strength:10KJ/m2
1.4Speeling strength:
UHMW and Rubber>200N/cm
Rubber and aluminum frame>200N/cm
2.Rubber Elastomer of impact bar
2.1 Tensile strength:>15N/mm2
2.2 Elongation:>400%
2.3 Shore Hardness: 35~40A
Our UHMW-PE impact bars Characters:
1.very flat on the surface
2.The thickness tolerance is +2 -0,some made according to your requirements.
3.The color is pure and any color can be made by us.
4.We can give you an accurate size of UHMW-PE Sheet with advanced machine.
5.Different shaped UHMW-PE Sheets also can be made by us like bending sheet.
6.According to different requirements with different application, special specifications can be customized, like anti-UV, fire-resistant,anti-static and with other characters.
impact bar for conveyor system
crusher blow bar
blow bar
impactor crusher parts
blow bar supplier
blow bar of impact crusher
casting blow bar
impact bars
impact beds
conveyor inpact bars
Impact Crusher Blow Bars
kleemann blow bar
blow bar for impact crusher
High chrome impact crusher spares
Guide rail was designed in response to demands from the packaging and material handling industries that require exceptional frictional and resistant properties. And it provides effective protection for expensive conveyor systems, especially in wet and corrosive environments.
We offer a wide variety of custom designed UHMW-PE chain guide that meet client specifications. Each one of them is made-to-order utilizing WM’s top of the line fabrication equipments. Those guide rails provide high abrasion, low coefficient of friction, high impact of resistance, and excellent chemical resistance. Their unique characteristics help conveying systems operate with minimal wear and extended life.
Contact Us
- Shandong Ningjin Xinxing Chemical Co., Ltd.
- Contact nameJune Lee
- Phone86-534-5231577
- AddressLiaohe Road ,Ningjin Industry zone Dezhou,Shandong
- Heavy-Duty Finished silver blue PE Tarpaulin, Finished Tarpolin Truck Cover, PE Tarp
- High Density Weaving PE Material Double Sided Coating standard duty silver Tarpaulin
- Kitchen countertop stone companion glass fiber honeycomb board
- Stone honeycomb companion
- Stone honeycomb companion
- portable house
- portable house
- High density wear-resistant nylon board PP plastic sheet
- High Density Weaving PE Material Double Sided Coating standard duty silver Tarpaulin
- PP Weed Barrier
- PE Tarpaulin
- Heavy-Duty Finished silver blue PE Tarpaulin, Finished Tarpolin Truck Cover, PE Tarp
- High Density Weaving PE Material Double Sided Coating Heavy duty Dark Blue Tarpaulin 280gsm
- retort separator PP sheets with factory price
- pp retort separator sheets with white color
- high quality plastic polypropylene retort separator sheets
- Retort polypropylene separator sheets retort PP plastic separator sheet
- Industrial Material Waterproof Roofing Cover Fireproof Truck Pe Tarpaulin Roll
- HDPE Blue Light Weight PE Tarpaulin Garden Protective Woven Fabric Cover Industrial Agriculture Roofing Hay Tarp Cover For Sale
- hot sale Acetate plastics/flexible sheet plastics/pvc calendered film/ Rigid thin clear plastic sheet/rigid pvc sheet/rigid transparent plastic sheet/150micron/300micron/400micron/600micron
- hot sale Acetate plastics/flexible sheet plastics/pvc calendered film/ Rigid thin clear plastic sheet/rigid pvc sheet/rigid transparent plastic sheet/150micron/300micron/400micron/600micron
- transparent inkjet printable plastic sheet for id cards
- golden inkjet printable plastic sheet for id cards
- light pearl silver inkjet plastic sheet for making id cards
Popular Searches
Recommended Products
- Grouting Tube for Concrete Joint
- Re-Injectable Tube for Construction Joint/Grouting Tube for Concrete Joint
- Construction Joint PU Grouting Injection Hose
- Injection Hose system for Construction Joint Sealing.
- Custom UHMW parts with bearings components
- ABS AG15AA High Temperature Resistant Injection Molding Class Auto Parts
- Good Quality Virgin low density lldpe FN840 Film grade
- Virgin low density lldpe FN810/812/840 Film grade
- Hot Sale Virgin low density lldpe FN810/812/840 Film grade from China
- ABS PA-707BK Resistant Injection Molding Class Auto Parts
- High Quality Virgin low density lldpe FT411 Film grade from China
- Hot Sale Virgin low density lldpe FT411 Film grade from China
Find Similar Products By Category
- Rubber & Plastics > Plastic Products > Plastic Sheets
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
June Lee
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-