JF truck spray booth for sale outdoor spray booth spray tan booth

• Provide a relevant basis, the workpiece parameters, the overall layout, process, water and electricity supply, building codes, technical specifications and other written request.
• Equipment installation space: according to the building plan and process flow diagram.
• Job type:

                                                                                 Job type

• Production: workpiece enters through its own power or other ways into Spray Booth, inlet air and exhaust air of the spray booth will be able to take the oil spray mist produced by painting away effectively, have a good working environment inside spray booth; Adopt dry mist filtering, while easy to clean, the spray booth needs to be convenient for cleaning and maintenance; paint drying time should be shortened by baking.
• Working method:clean, putty, polish, painting.
• Airflow organization:

           Spray booth:roof inlet air, bottom exhaust air, with 100% fresh air working function

           Preparation station: bottom exhaust air

• Painting operation area air speed when empty loaded:≥0.23m/s
• Interior illumination: ≥1000Lux
• Indoor cleanliness:air filtration efficiency >98%,99.9% filter above 10um ,conform to EN-799 EU5 filter grade requirements.
• Paint mist treatment way:spray booth adopts dry type collecting paint mist. Direct emissions.
• Noise:when the equipments are all working, the noise outside the factory should conform to EN-13355 regulation≤80dB
• Pressure control way:valve control
• Paint booth:valve adjust slight positive pressure,within -0Pa - 80Pa range
• Preparation station:valve adjust slight positive pressure,within -0Pa - 50Pa range
• Safe device

           Over-pressure alarm

           Low pressure alarm

          Safe temperature stop machine and keep ventilation

          Motor over current and over load

          Safe circuit separation