Home > Products > All Products From Senta Abrasives > 4" 100x6x16mm Depressed Center Grinding Disc For Metal
4" 100x6x16mm Depressed Center Grinding Disc For Metal
- 100000 Piece / Pieces per Month
- Foshan/Guangzhou
- T/T D/P D/A
You May Like
Product Details
Place of Origin: | Zhejiang, China | Brand Name: | SANTU | Model Number: | ST-T27-100616 |
Type: | Abrasive Disc | Size: | 100x6x16mm ( 4" ) |
Product Description
Specifications
Grinding disc for metal1 MPA EN12413
2 Depressed center
3 European standard 80m/s
4 Resin bond, more durable
Material:
Hard stone concrete, poroton, sand lime-bricks,refractory stones, concrete tile,terrazzo, porcelain,ceramics,abrasives,Bond, etc.
Abrasive type code | A: aluminum oxide |
C:silicon carbide | |
Z:zirconia alumina grain | |
ZA:zirconia alumina grain & aluminum oxide | |
AC:aluminum oxide & silicon carbide | |
WA:white corundum | |
Grit | Coarse :16-24# |
Medium:30-60# | |
Fine-medium:70-220# | |
Hardness | Soft: A to Z |
Medium:H to K | |
Hard: P to S | |
Very Hard: T to Z | |
Bond | BF : Resinoid bond |
Fibre=Reinforced , woven or nonwoven |
Type 27 Depressed Center Wheels for Grinding
Symbol of Construction Designation
Figure | structure | Remark |
a-v-a-v-a | 2 nets inside | |
a-v-a-1/2v | 1 net inside, half-net outside | |
v-a-v-a-1/2v | 1 net outside,1 net inside,half-net outside | |
a-v-a-v-a-v | 2 nets inside, 1 net outside | |
v-a-v-a-v-a | 1 net outside, 2 nets inside |
............................................................................ .................................................................................................................................
Application:
Grinding for edge , deburring and chamfering.
......................................................................................................................................................
Characteristics:
Medium hard grinding disc with excellent life and high grinding efficiency . It doesn't make work piece burnt .
Installing system
Never use flanges of different diameter ,two flanges clamping a cutting and grinding tools must always have the same outside diameter and support area.
CORRECT
INCORRECT
Safety Guide
To make sure you have the right disc for the right job we disply the following icons on our products, labels and packing.
Before use, carefully read the safety guide for the proper use.
1. Always handle and store wheels carefully. Cutting-off wheels should be stacked horizontally and flat , preferably on a steel base plate.
2.Always visually inspect all wheels before mounting for possible damage in transportation.
3. Always use a safety guard and ensure that it is correctly positioned and securely fitted. It should cover at least one half of the wheel and protect the operator in the unlikely event of a wheel breakage.
NON-REINFORCED CUTTING-OFF WHEELS SHOULD ONLY BE USED ON FIXED MACHINES AND SHOULD BE CORRECTLY GUARDED.
4. Always switch “OFF” the power at supply source and / or remove the plug from the socket before changing the wheel.
5. Always ensure that the spindle speed of the machine does not exceed the operating speed marked on the wheel.
6. Always use the correct wheel mounting flages and ensure that they are undamaged, clean, and free from burrs.
7. Allow newly mounted wheels to run at operating speed, with the guard in place, for a reasonable time before cutting or grinding.
8. Always wear EYE PROTECTION.
9. Always wear appropriate safety clothing such as DUST MASK, GLOVES, EAR PROTECTION, OVERALLS AND SAFETY SHOES.
10. Always have machine speeds checked regularly, especially after maintenance or repair. Machines fitted with speed control devices(Governors), must be properly maintained at all times.
11. Check tension of driving belts , where fitted, on a regular basis. Belts must be kept tight to ensure full power transmission.
12. Always secure the work piece firmly while it is being cut or grind.
13. Put portable machines in suitable cradles, when not being used, to avoid damage to the wheel.
14. Always use a portable machine in a comfortable position, where the work piece is well balanced and the machine is well supported.
15. Grind at an angle above 30 degrees to the work piece with a depressed center wheel.
16. Keep the working area around cutting and grinding operations clear. It is very dangerous if an operator trips and falls with an operating machine in his hands.
Key points for the best result
Hold your right angle grinder at 30° for grinding.
Package
25pcs packed a inner box, 200pcs/ carton.
Workshop and equipment
Transport and loading container
Contact Us
- Foshan Sinta Abrasives Co., Ltd.
- Contact nameTao Tao Chat Now
- Phone86-757-85959908
- AddressNo.1-2/17-18,Block B1,Guangdong Guangfo Hardware City Fifth Department Store,Guangfo Road,Dali Town,Nanhai District,Foshan City, Foshan, Guangdong
Product Categories
All Products From Senta Abrasives | Bonded Abrasives | Coated Abrasives | New Products |
Polishing Products | Superhard Materials |
New Products
- 4" 100x3x16mm Depressed Center Resin Bonded Grind Disc
- 4.5" 115x6x22mm MPA EN12413 Resin Grinding Disc
- 5" 125x6x22mm MPA EN12413 Grind Discs
- 6" 150x6x22mm Aluminium Grinding Disc
- 7" 180x6x22mm Grinding Wheel For Aluminium
- 4.5" 115x3x22mm Depressed Center Resin Bonded Grinding Discs
- T27 6" Mop Wheels for Stainless Steel
- T27 5" 125x22mm Mop Discs
- T27 4" Zirconia Radial Flap Disc
- 4" 100x16mm Flap Sanding Wheel
- 5" Depressed Center Abrasive Grinding Disk
- 5" 125x6x22mm EN12413 Hand Grinder Abrasive Disc
Popular Searches
Recommended Products
- DEERFOS PZ533 polishing 300 and 304 stainless steel, alloy steel, aircraft propellers and helicometers
- Diamond stone tool 100mm abrasive disc grinding wheel flexible polishing pad
- 10pcs Blade grinding plate polishing metal stainless steel 100 Angle grinding machine grinding wheel Angle polishing plate
- CBN Honing Cylinder Engine Block Diamond Honing Stones
- H70/H50 Honing Stone,Honing tools
- Li-Battery Electric Railway Grinding Machine/ Rail Grinder
- NCM-5.1 Frog and Switch Point Grinder
- NGM-6.0 Rail Profile Grinder
- Electroplated diamond bit
- compact bit
- Single Crystal Diamond Milling Tools
- Single Crystal Diamond Turning Tools
Find Similar Products By Category
- Hardware > Abrasive Tools