Cable Duct Rods,High Quality fiberglass conduit rods, Fiberglass Flexible reinforced rodder

1.description

    FRP threader aka (glass fiber reinforced plastic punch, FRP pipe, punch, wear pig, cable clamp, cable perforator) for traction guide line in the pipeline is a good auxiliary tool. Smooth and full of elasticity surface can make the punch easily through the narrow passage. Punch consists of three parts: copper, glass fiber reinforced, high pressure low density polyethylene protective layer (smooth and strong, resistant to bad environment). Copper conductor article make tong can be easily placed in different ways.

    Rod diameter 11 to 18 mm rod temperature range of 100-500 - m long and 40 ℃ to + 80 ℃the minimum bending radius 295 mm traction tension fracture density of 4.5 T line 150 g/m construction fuses with wall threader, length of 30 m, 40 m and 60 m, 80 m and 120 m threader is divided into FRP threader with ethylene threader base. Mainly used for water pipe, pipe wall in the guide rope, cable wire, etc.

   Threader as early as late is mainly used for walls under road traction, wait a minute later develop into sewer cable line line traction. Threading tools have to save time, effort and improve the efficiency advantages, can be used for telecom pipeline cleaning and fiber optic cable, cable and plastic tube of the cloth. Will first when using FRP rod by lead wheel derivation, then connected to the corresponding metal head, through the line.        When used to clean up, guide head drive cleaning tools, can clean tube; When used for cloth cable wire or iron wire into the first, and then use wire or iron wire traction cable into the pipe.

2.characteristic

(1). The tensile strength, bending performance is strong, can be free shuttle in the narrow pipes.

(2). Equipped with antirust drawing head.

(3). Strong anti-aging performance.

(4). Simple maintenance

(5). With a movable or portable bracket, convenient movement.

FRP perforator quality discrimination: FRP perforator rods by fiber layer and ABS of outer sheath, quality mainly depends on the glass fiber layer and glass fiber can be divided into non-alkali fiber, fiber, high alkali, alkali non-alkali fiber made of glass fiber reinforced plastic rod to make the glass fiber reinforced plastic punch strong toughness, tensile, not easily broken, anti-aging. Our factory FRP perforator is completely made of non-alkali fiber 100% guarantee the quality of products

3.specification

(1)Stem diameter classification:φ4.5mm,φ6mm,φ9mm,φ10mm,φ11mm,φ12mm,φ13mm,φ14mm,φ15mm,φ16mm

(2) The length range :10m-500m(can be made according to customer's requirement)

(3) Bending radius:330mm

(4) The density of fiber:210kg/m

(5) The fracture strain:4200kg

(6) Suitable temperature range:-40-+80

(7) Stent size classification: (1300mm×450mm×1330mm)(1200mm×420mm×1220mm)(980mm×350mm×1000mm) (680mm×240mm×700mm)(420mm×180mm×400mm)