This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided stainless steel outside which gives them high durability, extreme pressure resistance, and a professional and high-tech appearance. They are smooth bore for optimal flow.

PTFE exhibits unique properties including excellent chemical resistance, very high temperature resistance (up to 260°C, 500°F) and a frictionless, easy clean surface. These properties determine the types of application areas in which PTFE hose can provide the best possible hose product for the job.

Convoluted PTFE hose includes a helically convoluted PTFE liner tube.  This convoluted design makes the liner very flexible and very kink resistant across the size range. Problems are created, however, by the inner convolutions, which can entrap material and which generate ‘turbulent flow’ in the fluid passing through leading to reduced flow rates.

This product is used for the same types of applications as Smoothbore hose, but it is much more flexible in sizes above 3/8″, and is used where high flow rates and internal cleanability are not required.

Properties:
1. High Pressure endurance
2.Anti-corrosion, most chemical resistance,
3.lowest coefficient of friction, non-stick surface
4.wide temperature range, can be used in all kind of wheather
5.no odor, nontoxic, non-stick surface, non-flammable,
6.long flexural life,
7.low permeability.
8.The TOPFLON S.S. Braided smooth bore PTFE Hose meets or exceeds SAE 100R14 specifications for size and pressure.

Dimensiions and Data Sheet

Middle pressure PTFE hose

Super high pressure PTFE hose

Distinguished Features of PTFE Hose                                                              

1.This hose provides you with unsurpassed levels of performance and reliability for your tough performance applications.

2.It is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

3.The most useful characteristic of Teflon is chemical resistance. It also excels in water repellency, non-tackiness, low friction and electrical insulating properties.

4. PTFE protection against chemical attack throughout the entire assembly length

5. Temperature Rating: (-54°C to +260°C)

6 .lowest coefficient of friction, non-stick surface

Application:                               

Acid Transfer

Chemical Transfer

Generally suitable for in-plant applications

Vibration elimination in piping systems

Large diameter smooth bore

Slight misalignment in plastic or lined piping systems

Available as factory-built and tested assemblies only.

Foshan Nanhai Hongchang Jefer Electromechanical Valve Co.,Ltd is a factory set up in 2006. We are specializing in researching,developing and manufacturing different kinds of rotary joints, flexible metal hose, rubber hose , bellow expansion joint and valve equipment in China.

Our factory is covering over 10,000 square meters. Our R&D department consists of 3 engineers. Also, we have experienced QC personnel to check all our products strictly before packaging . All of our products meet the national standards and have passed ISO9001 certification. We obtain trust from customers by advanced technology, excellent quality and satisfactory service. Also, we specialized in custom rotary joints tailored to meet your project requirements.

Our mission is: Offering high-quality goods, excellent service, and reasonable price to customers; Using our product, you will get more benefits!

What is our shipping way and payment terms?

Shipping

1. FedEx/DHL/UPS/TNT for samples, Door-to-Door;

2. By Air or by Sea for batch goods, for FCL; Airport/ Port receiving;

3. Customers specifying freight forwarders or negotiable shipping methods!

4. Delivery Time: 3-7 days for samples; 5-25 days for batch goods.

Payment Terms

1. Payment: T/T, Western Union, ,PayPal; 30% deposits; 70% balance before delivery.

2. MOQ: 1pc

Why Choose Us?

1.We are a factory manufacturing rotary joint, metal hose, expansion joint,best production capability ,best quality control, Best Service .

2.100% QC inspection Before Shippment.

3.We have available in stock, can arrange the delivery 3 to 7days according to the quantity.

4. Welcome custom size. We can make the production according to your drawing or request.

FAQ                                                                          

Selection criteria
Just as there are differences between materials used in hoses, so are there differences between hoses using the same base material, like Teflon. Here are some of the basic characteristics to consider in choosing a hose for a specific application.

1.Smooth or convoluted bore? 

The primary differences are size and bend radius. Smooth bores are generally available only in bore sizes of 1 in. or less. For that size, a smooth bore hose has a minimum bend radius of 12 in., whereas a convoluted bore hose has a 3-in. minimum bend radius.

2.Wall thickness? 

Thicker walls are better for applications where the hose is flexed severely, as they are more resistant to buckling. Thick wall hoses are also less permeable to gasses. Thin wall hoses tend to cost less, because they contain less material.

3.Braid material? 

Type 304 stainless steel is the baseline braid material for most Teflon hoses. Type 316 stainless is recommended for marine hose applications. Braid material also plays into pressure rating of a hose. Some materials and hoses can handle pressures to 5,000 psi. Monel and bronze-braided hoses typically have lower pressure ratings.

4.Fittings?

 Teflon hoses are suitable for use with crimp, swage, or reusable fittings. Use the type you prefer, as there are no significant performance differences.

5.Interior or exterior? 

Hoses exposed to severe environmental conditions can be fitted with several forms of external protection, such as extruded thermoplastic and silicone sleeves, fire-resistant sleeves, and various types of metallic protective enclosures. Hoses used in vacuum can be fitted with internal coils or sleeves to prevent collapse.

Three common mistakes
To avoid application errors in your designs, beware of these common misunderstandings or “myths” about hoses made of Teflon

1.Teflon hoses are a high-cost item: 

While it is true that the Teflon PTFE paste used to make high grade hose is a premium material, the hose itself is often a more economical choice than traditional products when total lifecycle cost is considered. There are a number of factors to consider when comparing hose cost and performance.

Hoses made with Teflon can also reduce warranty costs for products like commercial/industrial coffee machines that tend to receive little or no maintenance from end users. They also add a factor of safety when used to drain hot products like fryer grease in fast food restaurants.

2. Teflon hoses tend to kink and crush easily: 

The truth is that all hoses tend to kink and crush easily, especially when they are improperly applied. Hoses made with Teflon are no better or worse than other materials when recommended bend radii and loadings are adhered to.

In applications where kinking or crushing is a possibility, it is a simple matter to add internal or external spring guards to reinforce the hose at critical points. Selecting a hose with thicker walls and a convoluted bore will also minimize kinking and resist crushing.

3. All hoses made with Teflon are the same:

Teflon is a trade name that is applied to a whole family of fluoropolymer-based materials, not all of which have the same properties. Two different Teflon materials are typically used in the hose industry, a melt-extrudable form (such as PFA, FEP, or ETFE) and a paste-extrudable form (PTFE).

Melt-extrudable materials necessarily have a lower melting point than paste-extrudable materials. The also exhibit lower flex fatigue resistance.