Oranage insulation phenolic resin paper board for CNT

Specifications

Phenolic resin paper board
Excellent electrical insulation
Good mechanical rigidity
No bubbles and cracks

Name: Bakelite sheet  

 

Type: Sheet and Rod

 

Technical Data

Test Method	Units	Standard
Tensile Strength	Kgf/cm²	1220
Cross Breaking Strength	Kgf/cm²	1400
Water Absorption (for 1.6 mm)	mg	100
Electric Strength(Flatwise for 1.6 mm)	kV	-
Insulation Resistance (min)	M	2.5 x 10²
Shear Strength (min)	Kgf/cm²	900
Compression Strength	Kgf/cm²	2,200
Impact Strength (min)	Kgf/cm²	4.2
Power factor (tan) at 1 MHz		-
Thickness (range) available	mm	0.25 to 38.1
Punchability*(Typical Punching Temp. Range)	ºC	80º - 100º
Permittivity (at 1 MHz)	-	-

 

Description

Bakelite sheet is a hard, dense material made by applying heat and pressure to layers of paper or glass cloth impregnated with phenolic resin. These layers of laminations are usually of cellulose paper, cotton fabrics, synthetic yarn fabrics, glass fabrics or unwoven fabrics. When heat and pressure are applied to the layers, a chemical reaction (polymerization) transforms the layers into a high-pressure thermosetting industrial laminated plastic.

 

Technical requirement for surface

The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The delamination and crackle on

the end surface are not allowed .   

The surface shall tidy and smooth, bubble, impurity are not allowed. But slight scratch and color punctum are allowed. Edge is to be cut smooth. The delamination and crackle on

the end surface are not allowed .  

 

Feature

High mechanical properties, and oil resistance and certain dielectric property.

Thermal rating is 120, and temperature resistance :130 centidegrees

 

Application

Chemical machine parts , general machine parts and gear ,and generators, Pads, base, baffle etc.. Generator ,transformer, fixture, inverter, motor and electric insulation component.