car lift manufaure hydraulic lift/made auto motive service equipment

Main Features      
1. Dual hydraulic cylindets, chain drive.      
2. Mechanical safety latch in two carriages' back.    
3.Single-point manual lock release.      
4. Two-section manual lock release.      
5. 360° teeth arm locking debive ensures steady locking in any position.
6. Automatic stop in the highest position.      
7.Overhead safety shut-off bar to prevent damage caused by liftingvehicle too high.
8. Parachute valve under each cylinder in case of high pressuire hose fracutre 
9. Synchronization cable and high intensity chain.      
10. Relief valve protect against overloading      
11. 24V low-voltage safe control keeps customers away from unexpected injury.
12. "UP" "DOWN" "EMERGENCY" button on control panel, simply operation.
13. CE Certificated.
Specification

Item No. CMTL3.6A
Lifting capacity 3600
Lifting height 1850mm
Minimum height 100mm
Overall height 3912mm
Overall width 3430mm
Length of long arm 830-1330mm
Length of short arm 541-1040mm
Width between columns 2860mm
Lifting time ≤60s
Lowering time >30s
Motor 220V/380V 50Hz/60Hz 1Ph/3Ph