1.2micron PP cartridge filter for pharmaceutical factory/pp pleated filter cartridge

 Features & Benefits

• High surface area.

• Wide selection of micron rating to meet different filtration requirement.

• Increased dirt holding capacity. Longer service life.

• Constructed of all polypropylene high purity media, meets FDA requirements.

• Multiple layered micro-porous construction ensures consistent filtration performance.

• No adhesive, thermal bonded manufacturing enable the smallest contaminant extraction and high durability.

• Wide selection of micron rating to meet different filtration requirement.

Applications

• Pre-filtration for RO system, DI water.

• Solvents, selected acids & lyes, chemical industry.

• Semiconductor, Electronic industry ultrapure water system

• Food and beverage, drinking water treatment.

• Oil industry.

Material of Construction

Media: Polypropylene

Support layer: Polypropylene

Core / Cage / End adaptor: Polypropylene

Sealing Method: Thermal bonding

Recommended Operating Conditions

Max. Differential Pressure:

Forward- 75psi (5.1bar) at 25°C

Forward- 25psi (1.7bar) at 80°C

Reverse- 30psi (2.0bar) at 25°C

Filters change recommended at 1.5-2.0bar

Max. Operating Temperature: 80°C

Sterilization: 5times, 20 Minutes cycles at 121°C

Cartridge Dimensions

Filtration Area: 0.5m²  each 10" length

Outer Diameter: 69mm

Nominal Length: 5", 10", 20", 30", 40"

Micron rating: 0.1, 0.2, 0.45, 0.65, 1, 3, 5....μm

Ordering Guide

  Packing &shipig:

 certificate: