Hydro massage bathtub OZONE SAUNA Infrared spa capsule

Functions Introduction

1. I.             Steam Function

1. 1.      Temperature setting: press the temperature/time selection button on the control box or remote control and you will see the original temperature and the temperature setting signal is on; then you can press temperature/time adjust button +/- to set your favorite steam temperature (0-60℃). 2 seconds later after stopping pressing the button, it will show the actual measured temperature.
2. 2.      Time setting: press the temperature/time selection button on the control box or remote control, the time setting will show, and you can press+/- to get the needed time set.

1. II.           Radio storage function

1. 1.   The frequency mode: when entering the frequency mode (MHz), the display screen will show channels (88-108). Then press the TUN button to adjust the radio frequency; when you press the button longer than 2 seconds, it will tune automatically. And the system will stop searching for listening or store the channels automatically when it searches radios.
2. 2.   The channel mode: when it is in the channel mode (ch.), the screen will show the two digitals of the channel, you can tune the channel by pressing TUN button.
3. 3.   Storage selection: you can listen to the radios by selecting the stored channels (1-28) and you can also store the tuned radio channels; at the same time, pressing this button until the characters on the display screen shine, the system enter the storage mode; when the shining stops, it means the radio channel has been stored in the system. You don’t have to tune the frequency again when you want to listen next time.

1. III.         Photo-catalyst function

Photo catalyst has strong capability in bactericidal, deodorization, mildew-proof, antifouling and self-cleaning, and water and air purification, and decomposing the toxins and heavy metals of skin in order to achieve the goal of losing weight, whitening, and recuperating functions. The photo catalyst will automatically generate when the instrument is switched on.

1. IV.         Ozone gas function:

Ozone gas function is on when pressing the button and it is off when pressing again. When the ozone gas function is turned on for non-stop 20 minutes, it will shut down automatically.

1. V.           Alarm function

When accident happens, press the alarm button, the alarm bell will ring, and in this case, all functions except the light are shut down automatically and only the alarm button works. To recover other functions, you need to turn off the alarm function and operate the instrument again. All functions except steam temperature time, water heating temperature setting, radio frequency need to be restarted.

1. VI.         Dry Steaming Function

The fat cells will be consumed and decomposed when exposed to light wave, so you can achieve the goal of losing weight and shaping body without exercising much.

1. VII.       Shutting down function

When pressing ON/OFF button, you can shut down all functions and open the drainage valve. The instrument will drain the water automatically. After the water is drained, please turn off the power so as to keep the instrument in good condition.

1. VIII.     Music function

Provide the physical therapist with a pleasant and comfortable environment via playing pleasant music or one’s favorite programs, for the purpose of relaxing one’s mind, dissipating fatigue and make one energetic.