STCV High Precision Brazed Welded Frame (tools parts)-sunny

Specifications

Model: HPWF-250/2300
Blade Dia.: 250~2000mm
Coolant: cycled water
Air Pressure: 6Kg/cm2

Welding operating

1. install the blade in the blade clamp plate (No.5 in picture).
2. Life the blade to the welding height use the blade up and down switch (No.6 in picture).
3. Pull blade clamp handle (No.7 in picture), clamp the blade.
4. Pull segment lock handle (No.8 in picture), nip the segment on segment clamp (No.9 in picture) .
5. Loosen lock button (No.10 in picture), adjust alignment adjuster (No.11 in picture), and make the segment two edges symmetrical when segments connects the body.
6. Pull blade clamp handle (No.7 in picture), loosen the blade. Adjust blade segment localizer (No.12 in picture), adjust the welded position.
7. Pull blade clamp handle (No.7 in picture), clamp the blade. Wipe welding liquid on the body and put the silver solder, lower the segment up and down handle (No.4 in picture) to make the segment stick on the blade, switch on the welding machine starting to weld(welding time depending on the thickness of the segment).
8. Pull blade clamp handle (No.7 in picture), loosen the blade. Measuring the symmetrical between segment two edge.
9. According to the frame provided micrometer gauge, fine adjust the symmetrical once again after step 8 checking.
10. Repeat step 2 to 9, till welded segments and body symmetrical, then can proceed with the production welding.