HOT!!direct manufacturer!!multifunctional rotary drier/drying machine,best-selling warm air drier/dryer

Specifications

rotary drier:
1.dry evenly
2.Low emission of contamination
3.Minimum fuel consumption
4.CE certificate

The main structure of coal rotary dryer:

• Main tube body, front roller cricle, rear roller circle, gear, side plate of rolls, small gear, outlet part, reduce box, motor, heated air duct, inlet moonth and fumance body and other structure.
• The fuel can be coal, fire, gas, and electricity and other fuel.
• We can design the gas generator furnace, firebox, and elevator, belt conveyor, constant feeding machine, dust collector cyclone, draft fan and so on.

Coal rotary dryer main application:

• The rotary dryer made by our company can be used in building materials, metallurgy, chemical industry, cement plant for drying of limestone slag, coal powder, slag, clay stone.

Coal rotary dryer usage:

• This series dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical. 
• the moisture is usually at 12%-14%. After dried, the moisture can reduce to 2-4%, also can satisfy the request of hardness, storage and transportation. On that basis, then through adaptability reform, the moisture can reduce to less than 1.5%; Also can dry briquetting,coal rods etc. Particulate matter.

 

Working principle of rotary dryer :

Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together. Materials go to the lower side by gravity when the barrel rotates. Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.

 

Technical data of Rotary Dryer:

 

type(mm)	indiclination(%)	rotation speed(r/min)	input tempreture(ºC)	motor power(kw)	outpur(t/h)	weight(t)	reforance
Φ600×6000	3-5	3-8	≤700	3	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	18-30	60
Φ2800×15000	3-5	1.5-5	≤800	40	20-35	72.5
Φ2800×18000	3-5	1.5-5	≤800	40	25-35	75
Φ3000×20000	3-5	1.5-5	≤800	55	28-40	78
Φ3000×25000	3-5	1.5-5	≤800	75	32-45	104.9

 

 Products display:

 

 

 

 

Technology and innovation are our eternal pursuit. “High quality, competitive price, best service, timely delivery” is our philosophy, and we hope to fully cooperate with overseas partners on the basis of equality and mutual benefits. We sincerely hope to become your Chinese supplier and partner in the mechanical field.