CE approved coconut shell carbonization stove/continuous carbonization furnace/charcoal making oven

1. Main data of the coconut shell carbonization stove:

2. How to operate our coconut shell carbonization stove:

A: put the raw material into the inner stove neatly;

B: use the hoist to hang the inner stove into the outer stove;

C: use the hoist to hang the caps to seal the inner stove with outer stove;

D: fire the outer stove and then to make the charcoal.

3. Introduction of the coconut shell carbonization stove:

Our coconut shell carbonization stove are included inner stove, when one inner stove are finished,  it can be hoisted outside,.  And when the first inner stove are cooling , the other inner stove can be carbonized at the same time, in this way the cooling time can be reduced much, thus, the productive efficiency increase a lot .This type of stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.   And there is little smoking and pollution during the producing.

4. Raw material before and after carbonizing from our coconut shell carbonization stove:

Wood log, tree, tree branch, wood briquette, coconut shell, palm nutshell, Walnut Shell, Macadamia nutshell, bamboo, and other nut shell or hard raw material

5. Other carbonization furnace to make charcoal:

1) Energy saving carbonziation furnace:

A: raw material: raw wood, wood chip, tree (tree branch) coconut shell, nut shell, And briquette
B: Working principle : hot air carbonization process technology, this furnace can put three Carbonization tanks one time, and there are three lighting-up tuber, when light the fire, the energy can heat the three tanks at the same time, and it will save 50% energy. And we can equip the other three set tanks for recycle, and it will save cooling times
C: advantage:
1. is our newest developed product with 3 patents
2. Greatly increases carbonization ratio (increased from about 88% to 99%)
3. Shortens the carbonization time and shows the features of easy operation, higher safety and efficiency, energy saving and environmental protection.

D: Main data:

2) Square carbonization furnace:
A. Raw materials: Wood chips, wood branches, raw wood and wood briquettes and so on
B. Working principle: Burning by anoxic conditions, then the wood carbonized into charcoal
C: Carbonizing speed: 1-3 ton/day ( 8-12 hours for carbonization, 8-12hours for natural cooling)
D: Material the Furnace: special high temperature resistant material and steel plate
E: Operation: one people can control 4-5 set, don’t need the auxiliary machinery 
F: Energy Consumption: 20-50kg firewood or 15-30kg natural gas
G: It adopted Superheated Stream cooling system, thus can speed up the cooling process, improve the quality of charcoal, and shorten the charring period.
H: Usage: Cooking fuel, Industrial fuel, Automotive fuel, Purification and filtration, Art, Horticulture, Medicine, Smoking, Environmental implications

I: Main data:

3) Sawdust carbonization machine:

A: The sawdust carboniztaion machine is our patent product, until now, just our company can produce this machine. The machine can change the sawdust to the charcoal powder directly,

B: Main data:

Gongyi xiaoyi Mingyang Machinery Plant is located in Zhengzhou City,which is the biggest manufacturing base of charcoal making machinery. And we are the one of the earliest and largest manufacturers of renewable fuel & energy equipment and related machinery. After 15 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. Our products are widely accepted in both domestic and world markets, and also are exported to more than 30 countries, such as England, Russia, Sweden, Poland, Iran, Sudan, South Malaysia, Indonesia, Vietnam,etc. We have lots of experience to export and cooperate with all over the world, and we also sincerely welcome you to come to our factory to visit and watch our products and factory.

We have many kinds of certifications, famous in domestic and overseas, such as ISO Approved, CE Approved, SGS, BV and other certifications in our country. Such as Alibaba certifications, Made-in China, etc. You can find our factory and watch our products in many websites, We win in the strength, win in the quality and win in the service. This is why our clients choose us.

1. Pre-sale service: according to your special needs, design and manufacture products for you, provide you with project design, process design, purchase program.

2. On sale: accompany you to check the performance of the machine.

3. After-sale service: we will send engineers to install the equipments to put them into use as soon as possible, commissioning and training operators on site.

1. Contact me first and make a deal;

2. Sign order and then pay the down payment;

3. Receive the down payment, we arrange our factory to produce the machines;

4. After finished the manufacturing, we test, examine the machines;

5. The last step is to transport the machines to your country port. The whole line is finished.

Sales Manager: Ms. Bella Ren

Cellphone: 008615039052281

Skype: bella616919

Wechat: 008615039052281

Whatsapp: 008615039052281