Patented Product both side can be used ring roller die for biomass Mill from Taichang with capacity 1.5-2t/h

Patented Product both side can be used ring roller die for biomass Mill from Taichang with capacity 1.5-2t/h      (008618888342366)

Advantage points of biomass pelllet mill:

1.Feeder has a variable speed controller to meet different outputs requirements;

2. This product aims to produce pellet with the milled sawdust and pasture. It takes use of special feed pellet mill strengthening the driving part such as, ring die, press roll and hoop

3. Double-layer dies, up and down dual use, high capacity and energy saving.

4. Ring die, vertical structure, conducive to the pelletizing room cooling.

5 TCZL series pellet mill has adopted gradeless speed-adjusting motor to feed and installed ferromagnetic magnet system, overload protection device and a limit switch to make sure the security. Besides, there are outer pellet-discharged structure and pressure or oil pump lubrication system.

6.TCZL series pellet mill can press 1.5-12mm pellets diameter,if you need different pellets diameter,just change the different ring die is ok.

7.TCZL series pellet mill,Before pressing the pellets,the raw materials should be powder with 15%-20% moisture.

8.This ring die pellet machine is set up with security iron absorption device order to prevent the iron impurities during the production process, and it is wood pellet machine also installed with the safety whistle device as the protection while overload.

9.TCZL series pellet mill is widely used in feed factories, breed aquatics factories and China traditional medicine factories etc. It can be used together with powder material. Its capacity is superior in the same industry home and abroad.

 Raw Materials for Biomass Pellet Machine: 

The raw material for this machine can be the food grain like corn, wheat and the crushed waste from agriculture for example, corn straw, groundnut shell, grass, wheat bran, sawdust, and animal manure and so on, 

Working principle  of the biomass pellet machine:

TCZL series machine between the mould and roller extrusion die and friction interaction principle,make the molding material to be acquired . Material need not add any additives or binder in the machining process, Straw materials contain a certain number of cellulose and lignin, The lignin is the material structure of the monomer, belongs to the benzene propane type polymer compounds. Can strengthen the cell wall, together with the role of the cellulose, Lignin belong to amorphous,does not dissolve in any solvent at room temperature, without melting point, but there have softening point. When the temperature reaches a certain, the lignin to soften the cohesive force, and under certain pressure, make its cellulose molecular mass displacement and deformation and extension, 

 Biomass wood Pellet Machine diameter:

In order to offer you the reasonable machines,we need more details as followings:

1.The raw materials and the size you used.

2. Moisture content of the raw materials or give me the picture of raw materials.

3.The size of pellet you needed.

4.The voltage frequency in your country.

5.The output you needed in one hour.