Indonesia hot sales barge ship launching airbag of good quality

Specifications

barge ship launching airbag
1.CCS,BV approved
2.Good tightness
3.factory sell
4.Special synthetic tire-cord

          For give good advise of the ship airbag, we should know the follwong information

1.   Type of vessel?  
2.   LOA (length) of ship?  
3.   Width of vessel?  
4.   Vessel's actual launched weight (gravity weight)/weight without cargo? 
5.   What is the vessel's DWT? 
6.   Type of ground ship is built on? (Dirt, concrete, etc.)  
7.   Depth in meters of the water where the ship first enters the water?
8.   What's the angle degree of slipway? (Land, not under water)  
9.   Please provide the low/high tide schedule at site.
10. The working height? (The block stand height under the vessel) 
11. Distance from bottom of propeller to the water level?
12. Distance from back of vessel (in dry dock) to the water entry point?   

                

 

Advantages of florescence high bearing capacity rubber air bag for ship use

 

1. High strength

 

2. Wear resistance and anti-aging

3. Good air tightness

 

4. Safety and reliability

 

5. High kneading&compressing resistance and damping capacity

 

 

 

  We can also supply customized size as per specific requirement:

 

Diameter (D):	From 0.8m to 2.4m
Effective Length (EL):	From 6.0m to 20.0m
Total Length (TL):	From 7.0m to 21.5m
Standard Number of Layers:	Usually 4-10 layers
Loading Capacity:	About 10-40 T/M

 

 

 5.Guaranteed working pressure of Marine rubber airbags used for salvage shipwreck :

 

type	D=0.8m	D=1.0m	D=1.2m	D=1.5m	D=1.8m	D=2.0m
3 layers	0.13MPA	0.10MPA	0.09MPA	0.07MPA	0.06MPA	0.05MPA
4 layers	0.17MPA	0.13MPA	0.11MPA	0.09MPA	0.08MPA	0.07MPA
5 layers	0.21MPA	0.17MPA	0.14MPA	0.11MPA	0.09MPA	0.08MPA
6 layers	0.25MPA	0.20MPA	0.17MPA	0.13MPA	0.11MPA	0.10MPA
7 layers	0.29MPA	0.23MPA	0.20MPA	0.15MPA	0.13MPA	0.12MPA
8 layers	0.33MPA	0.26MPA	0.23MPA	0.17MPA	0.15MPA	0.14MPA

 

 

 

 

If you have any interest,pls feel free to contact me -------Jason Zhang