P Grade / F Grade / W Grade brown fused alumina with high Al2O3 content

What is Brown Fused Alumina

Brown fused alumina is bauxite, coke, anthracite as main raw materials, in the Canon of high temperature smelting electric arc furnace, the main chemical composition of AL2O3, TiO2 loop contains a small amount of SiO2 and Fe2O3, microhardness HV1800-2200, high toughness than SiC, use it made of abrasive, suitable for grinding the high tensile metals, such as all kinds of steel, malleable cast iron, hard bronze, etc., also can make advanced refractories.

Level of Brown Fused Alumina

Corundum principal component is the alumina, aluminum content hierarchical is used to distinguish, the lower the aluminum content is, the lower the hardness. 

	Primary BFA (corundum) palm red, black, granular, is mainly used for precision casting, wear-resisting material, the higher requirements for abrasive industry, such as grinding wheel manufacturing fine buffing, brown corundum grinding wheel in grinding is the main type of grinding tool.
Secondary BFA (corundum)  Black granule, mainly used for sanding, polishing, grinding, anti-corrosion derusting, stone carving, gauze materials, cut pieces, etc. Such as cleaning, surface coating on the surface of the workpiece before processing, change the physical and mechanical properties of the workpiece, workpiece surface finishing processing.
	Level 3 BFA (corundum) Black particles gray powder, can be applied to all kinds of ground floor sand required. Such as airport runways, playground, and so on.

1.For precision casting and high-grade refractory.
2.For bake lining ,Catalyst carrier ,friction products 
3.For pressure blasting hard abrasives;Refractory industry 
4.For wet and dry blasting ,grinding,lapping and polishing media 
5.For abrasive tools: grinding wheel, Lapping and polishing non-skid title;
6.For bonded and Coated abrasives ,Thermal Spraying (Plasma Spraying) 
7.For lapping & Micro-Blasting applications .refractories,Ceramics and Tiles.