Stable and efficiency micro-heat regenerative adsorption pressure air dryer for air compressor

KAISHAN Stable and Efficiency Micro-heat Regenerative Adsorption Pressure Air Dryer for Aair Compressor

Working condition and tech-parameter:

Design pressure dew-point:

Standard type: -20 centigrade degree(Customized -40 centigrade degree,-70 centigrade degree)

Inlet air-temperature:20-45 centigrade degree

Working pressure: 0.6~1.0 MPa

Desiccant: Standard activated aluminium oxide

Working type: Two absorption-canister work alternately

Control type: Microcomputer process control

Oil-content of inlet air: lower than 0.1 PPM

Pressure loss: lower than 3% of the inlet pressure

Regenerative air capacity: lower than 6~8%

Regenerative type: Micro-heat

Heater voltage: 1~8 cubic meter per minute used 220V; above 10 cubic meter per minute used 380V

Period: 1~20 cubic meter per minute with 120 minutes; 25~50 cubic meter per minute with 240 minutes;60~100 cubic meter per minute with 360 minutes; above 100 cubic meter per minute with 480 minutes

Please contact us for further information.