Conveyor mesh belt dryer for wood chips and coal

Specifications

Conveyor mesh belt dryer for wood chips and coal
1)Features:high efficiency,low investment,eco-friendly,etc;
2)Capacity:5-10t

               Conveyor mesh belt dryer for wood chips and coal

1Application of  mesh belt dryer :

The key technology of vertical dryer is to control the flow rate and residence time of the material in every area of the dryer, making the hot flue gas fully convected, radiated and heat conducted with the material which thus can be scattered in the dryer as far as possible to enlarge the contact area between the hot smoke and the material. At the same time, material drying parameter optimization microcomputer software technology has been adopted to proceed online detection to the material moisture and gas temperature in the preheating zone, stoving zone and drying zone, and adjust the system parameters on line such as heating ability, lead-wind quantity, secondary hot wind distribution, heat supply capacity, material closure capacity and retention time,etc., realizing dynamic optimization balance of the system and improving the heat utilization rate.

 

2.Advantages of mesh belt dryer :

1.Innovative design: with new-style vertical of drying,the material is free dropping gas material countercurrent operation,which is integrated gathering heat conduction and thermal radiation into a body .Heat efficiency is up to 93%. The whole process is automatic control, easy operation and maintenance.
2.Less investment: application of small area can save 80% of the investment, and it is especially suitable for the old-line transformation. It can make use of abandoned or idle kiln, mill, tower, library and horizontal dryer, etc. further reducing the investment.
3.Widely used: drying clay, slag, fly ash, coal, iron, mineral processing, chemical, foundry and other industries of material drying.
4.Long life: the internal components is used in all heat-resistant alloy, long life, low failure rate.

 

3.Parameters of vertical dryer:

Model	Output(t/h)	Drying former moisture	Afer drying moisture	Drying time(h)	Power(kw)
LG1800	5-10	>25%	1.5-5%	1.5-2.5	15
LG2800	10-15	>25%	1.5-5%	1.5-2.5	22
LG3200	20-25	>25%	1.5-5%	1.5-2.5	37

 

 

in order to offer you best price,please tell Abby:

1.what is the raw material you required ?

 2.what is the capacity per hour?

 3.what is the moisture before and after dryer you required?

 4.what is fuel avaliable?

Welcome to visit our factory, if you other question,please contact with us.