DMD 2000 Point Type Infrared Combustible Gas Detector

Specifications

Gas Detector with LCD display
With alarm relay output and remoto control
With Fault and Alarm indicators
ISO9001&CE

1:Gas Detector with LCD display
2:With alarm relay output and remoto control
3:With Fault and Alarm indicators
4:ISO9001&CE

 This Toxic gas detector with LED display and Remote control is our best detector. It can work alone,and also can network with gas monitoring system.

 

Feature:

1.LCD display ,can display real-time gas concentration.

2.With Fault and Alarm indicators.

3.With Remote Control. You can calibrate the detector without opening cover.

4.Adopts imported sensor with high measurement accuracy, high stability, strong anti-poisoning and anti-interference ability.

5.Automatic recognition and protection the concentration of sensors , short-circuit and open-circuit of sensors, and automatic fault detection .

6.Explosion-proof design, it is suitable for II gas environment

7.Adopts HBUS four buses communication mode ,power wire and signal wire both use non-polarity design.And with automatic protection function to avoid damage to hardware caused by short -circuits in the use

8.Built-in passive switching output. Not only can achieve the connection with Sound and Light Alarm, but also achieve site control.

9.Double G 3/4" joint design, not only achieve the interconnection of bus system, but also can connect Sound and Light Alarm.   

10.Intelligent sensor, replace sensor without demarcating.

11.Pipe-mounted and wall-mounted optional.