vehicles oil filter cartridge processing line for crushing metal and recycling waste oil

Vehicles Oil Filter Cartridge Processing Line

Process Flow

1. Crushing waste engine oil filter and meanwhile separating out metal lumps  by installing a magnetic separator at the discharging belt .

2. pressing those paper element in a bucket type hydraulic press filter for collecting waste oil .

Remark: for those metal lumps , and that is possible for you to sell them to big steel mill , as I know , usually it cost higher than the ones in big volume .

                for those waste engine oil you got , there are two ways for recycling , one is refinement firstly and then readd new annexing agent ; the other one is used as vessel fuel .

Specifications:

Crusher

Belt Conveyor

feeding belt conveyor : length 10M & 3KW motor

discharging belt conveyor : length 6M & 0.75kw motor

Remark: belt width for aboved two both kind are 500mm .

Hydraulic Press :

size: 1.8*0.8*2.75M

weight : 1400kgs

handling capacity : no exact data , but as testing , per ton can get near 200kgs waste engine oil .

power:3kw

max working pressure :40Mpa

pressing time for one barrel :20-30 minutes

material: carbon steel and common iron

barrel size :425mm dia. * 680mm height

steel plate :24pcs

oil contained in paper residue cake :2%

If you have great interest on our vehicles oil filter cartridge processing line , pls contact me as following info :