DCDC boost universal electric vehicle charging module 24V turn 46V58V62V69V77V boost module

Product Name: DCDC boost universal electric vehicle charging module 24V turn 46V58V62V69V77V boost module
Product details: First, the nature of the module: DC-DC boost power supply module
Second, the input voltage:. DC22-100V
Output voltage: 46V 58V 62V 69V 77V 82V jumper by selecting the appropriate voltage, the power board selection methods Description: Short circuit selection
Short circuit 12 for 46V
Short circuit 32 for 58V
Short circuit 45 for 62V
Short circuit 65 for 69V
Short circuit 78 for 77V
Short circuit 98 to 82V adjustable voltage and other special needs, please contact customer service,
Special Note:
1. This module Boost module, the output voltage must be higher than the input voltage of 2V above only output, which means we must ensure a minimum pressure at 2V above
2. 0.5V output voltage error may have errors, do not buy if you care about, not as a basis for the difference in assessment
Third, the input current, the maximum 15A
Fourth, the output current, according to the actual situation to use, to ensure power supply low heat to long-term stability, the following parameters, for reference:
The following output 35V 2A below the long-term
Below 50V, 35V 1.5A above the long-term
Less than 72V 50V 1A long
72V 0.5A above the long-term

V. Output power: natural cooling 70W (MAX), enhance heat dissipation 100W (MAX) the actual power
Six, conversion efficiency: 85% typical
Output Ripple: 2% (MAX) 20M bandwidth
Seven, the working temperature: Industrial grade (-25 ℃ to + 65 ℃) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)
Full temperature: 45 ℃
No-load current: Typical 35mA range, and the size of the output voltage, input, the greater the power consumption
Load regulation: ± 0.5%
Voltage Regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please enter the installation of fuses or circuit protection)
Connection: solderless terminal
Weight: 42-45 g

Wiring: the above chart, .IN + input positive, IN- input negative, OUT + Output +, OUT- output negative.
Volume Specifications:
75 (L) * 45 (W) * 28.5 (H) mm
Note:
1. Within one meter lead wire length not less than 1.5 square feet, if greater than 1 m length wire, bold, recommended 2.5 to 4 square feet of line is better
2. The module operates at high power, high temperature, plus time to install the fan housing, low power without adding a fan, be sure that the low temperature,
3. There is no short-circuit protection, make sure you do not reversed, do not short-circuit
3 Application:
1.DIY an output adjustable vehicle power supply, only need to enter access your 12V power supply, the output voltage you choose you need to be a voltage, the output voltage can not be lower than the input voltage, oh.
2. The power supply for your electronic device, as long as the voltage is adjusted to the voltage and current you need not exceed the rated current is able to work properly.
3. The solar battery charging for electric vehicles