FX828 Glazed roof sheet embossing machine

                                     FX828 Glazed roof sheet embossing machine

Roll forming machine including mainly roofing sheet corrugating machines, 

glazed tile roll forming machine,double layers roll forming machine,light gague keel steel roll forming machine,C/Z/U/W purlin roll froming machine,floor steel deck roll forming machine,high railway guardrail steel roll  forming machine,

shutter door roll forming machine and so on.

Glazed roof sheet embossing machine

• Easy operate with high production capacity
• Carriage with hardened gear or chain
• Magnetic linear encoder for direct measuring 
• Precision length and width control 

 1.Technical parameters :

2.Details show:

a. Feeding and decoiling

b. Forming

c. Embossing and Cutting

d. Runout table and Spare parts

3.Note for use and maintenance

Glazed tile roll forming machine 

A.Notes:

1),before use,you must check whether all connections are steady,whether  bolts and nuts are tightinstallation.when start the machine,you must make sure there are enough lubrication oil in the case.

2),when start the machine commissioning,the machine should run idle,then check it carefully such as noise,vibration and whether the oil window works smoothly,whether every parts movement coordination.

3),You must cut off power when install the mould,move the motor belt and big gear by hand,turn the workbench and make sure the slide up to the highest point.