factory outlets 2 stroke 49cc engine gas powered skateboard LWGS-01

1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.

This is a motorized skateboard with low power，which is specially used for sporting and entertainment，with centrifugal toe-wearing clutch．speed reducing on gear，chain transmission fuel saved,assembled with powerful single cylinder air cooling,two stroke engine


General safety precaution

1.Please read the instruction manual carefully before using， And know about its performance,usage,maintenance＆service, and follow correct operating procedures.

2.Do not Lend this goods to persons not to operate it，follow the

Local traffic rules strictly,please ride it on the slow lane,don’t Allow to ride this goods to load any other people together

3．Should slow down in a rainy or snowy day and brake in advance in such days when necessary in order to be safety

4．Minors shall never operate without adult supervision.

5．Never operate the skateboard on any public street．Road or highway

6.Never operate the skateboard without wearing proper safety equipment，including helmet,shoes,protective clothing and pads

7．Always ride with both foot through the foot-protector bar oil the board

8.Never operate at excessive speed Proper speed is determined by terrain,visibility,operating condition and experience

9.Never attempt wheelies Jump，or other shunts

10.Always inspect your skateboard prior to each use to make Sure it is in safe operating condition. Follow inspection and maintenance procedures and schedules described in this manual

11.Never operate the skateboard on steep hill or inclines

12.Do not turn at excessive speed

13.Fuel is highly flammable．Keep it safe away from any source Of tire,especially when refueling

14.Engine and muffler get hot while in use Do not touch

15.Keep all body parts and clothing away from chain



Check prior to riding and Caution

1.Check fuel door if flexible,check the flexibility and reliability on rear brake actuation，if it is not in good situation．Adjust it in time

2.Filling air for front and real-tire should be proper.Normally, air pressure is 85P.S.I Too much air can cruse non-smooth run,if tire pressure is too less．must have an effect on the speed and fuel consumption will be enlarged

3.Transmission parts should be checked and adjust frequently， and lubricant to be filled so that the transmission is flexible

4．Check all bolts and nuts if they fire loose please tighten it if necessary

5.Keep body clean and away from moisture high temperature and gas corrosive



Instruction for operating

1.Preparation: check stop switch,spark plug and fuel in-line and fuel return line if connected properly .Use unleaded

gasoline and a good 2cyele engine oil in the ratio of 25:1 and filling in fuel tank.If not mixed to proper ratio,the engine

Performance may decrease or damage to the engine may occur.

2.Press the clear priming bulb underneath the carburetor until fuel can be seen in the clear plastic fuel return line

3．Close choke valve

4.Pull the starter grip briskly and return gently，engine should start within a few pulls.Then,open choke valve and will be

running

5.If there is any difficulties on start-up，open air adjuster a little，turn speed throttle handle，pull up start handle，engine start，then open air door adjuster.

6.Proper riding：after the engine start-up,people stand on the board through the two fool-protector bar,then accelerating

Slowly;when climbing and turning,accelerating slowly

7.Stop：press the stop button on the handle bar.