UniqueFire Led diving Flashlight 1200lm with Type III military grade hard-anodizing

Specifications

1.CREE XM-L U2 Diving LED torch
2.HAIII Anodic Oxidation for resisting corrosion by water
3.Wateproof design
4. 10watt

UniqueFire Led diving Flashlight 1200lm with Type III military grade hard-anodizing

  Features                                                           

* CREE XM-L U2 LED – High intensity and more than 1200Lumens.

 

* The torch features a unique thermostatic circuit to regulate temperature and prevent overheating.

     

* Type III military grade hard-anodizing aerospace-grade aluminum body.

 

* High quality watertight O-ring sealed construction.

 

* Toughened ultra clear glass lens.

 

* Aluminum reflector for a flawless beam.

   

* High quality hand strip/lanyard / belt and bag available.

 

* Charge and recharge protected Li-ion battery.

 

* Tail key stroke switch for on/off or brightness mode change : HIGH-MID-LOW-STROBE-SOS .

Specifications                                       

 

Brand	UniqueFire
Model	UF-DT2
LED Emitter Type	Cree XM-L U2
Luminous Flux	900-1200 Lumens
Lamp Life	100,000 Hours
Power Source	1 x 18650/(Not included)
Modes	5 (High>Mid>Low>Strobe>SOS)
Input Voltage	3.6-4.2 V
Operate temperature	-5 ~ +50 degrees Celsius
Switch	Body magnetic switch
Construction	Shockproof and waterproof
Lens	Tempered Glass Lens
Reflector	Aluminum SMO Reflector
Running Hour	2-3 hours
Dimensions	44*140mm
Weight	220g
Materal of Product	Aluminium Alloy
Flashlight processing technology	Aerospace Grade Aluminum Body with Anti Scratching type III hard anodization, which can prevent sea water  corrosions

 

 

 

 

 

Picture:

 

 

 

Note                                                                                       

 

 

♦Please prevent your eyes from the light, the strong light will hurt you.

 

♦Please don't disassemble the flashlights' head part, this may occur damage to the reflector cup and the LED.

 

♦Clean the flashlight with soft fabric at once if it's stained with sea water or corrosive liquids, and blow dry it.

 

♦If you can't screw the flashlight smoothly, please smear some silicone grease on the screw thread.

 

♦Please take out the battery if you don't use the flashlight, and save the battery in dry conditions.