Metal Scrap 304 Stainless Steel Scrap metal scrap for sale

Bulk Packing
20 ton loaded in 20 foot container

Specifications

1.304 Stainless Steel Scrap
2.Metal Scrap
3.For Recycling
4.Stock Available.
5.MOQ 10 Ton

  

 

Metal Scrap 304 Stainless Steel Scrap available

 

Grade 304 is the standard "18/8" stainless; it is the most versatile and most widely used stainless steel, available in a wider range of products, forms and finishes than any other. It has excellent forming and welding characteristics. The balanced austenitic structure of Grade 304 enables it to be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For these applications it is common to use special "304DDQ" (Deep Drawing Quality) variants. Grade 304 is readily brake or roll formed into a variety of components for applications in the industrial, architectural, and transportation fields. Grade 304 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

 

Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (over about 6mm). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

 

 

 

 

 

 

 

 

 

Corrosion Resistance

Excellent in a wide range of atmospheric environments and many corrosive media. Subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60°C. Considered resistant to potable water with up to about 200mg/L chlorides at ambient temperatures, reducing to about 150mg/L at 60°C.

Heat Resistance

Good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C. Continuous use of 304 in the 425-860°C range is not recommended if subsequent aqueous corrosion resistance is important. Grade 304L is more resistant to carbide precipitation and can be heated into the above temperature range.

Grade 304H has higher strength at elevated temperatures so is often used for structural and pressure-containing applications at temperatures above about 500°C and up to about 800°C. 304H will become sensitised in the temperature range of 425-860°C; this is not a problem for high temperature applications, but will result in reduced aqueous corrosion resistance.

Heat Treatment

Solution Treatment (Annealing) - Heat to 1010-1120°C and cool rapidly. These grades cannot be hardened by thermal treatment.

Welding

Excellent weldability by all standard fusion methods, both with and without filler metals. AS 1554.6 pre-qualifies welding of 304 with Grade 308 and 304L with 308L rods or electrodes (and with their high silicon equivalents). Heavy welded sections in Grade 304 may require post-weld annealing for maximum corrosion resistance. This is not required for Grade 304L. Grade 321 may also be used as an alternative to 304 if heavy section welding is required and post-weld heat treatment is not possible.

Machining

A "Ugima" improved machinability version of grade 304 is available in bar products. "Ugima" machines significantly better than standard 304 or 304L, giving higher machining rates and lower tool wear in many operations.

Dual Certification

It is common for 304 and 304L to be stocked in "Dual Certified" form, particularly in plate and pipe. These items have chemical and mechanical properties complying with both 304 and 304L specifications. Such dual certified product does not meet 304H specifications and may be unacceptable for high temperature applications.

Applications

Typical applications include:

• Food processing equipment, particularly in beer brewing, milk processing & wine making.
• Kitchen benches, sinks, troughs, equipment and appliances
• Architectural panelling, railings & trim
• Chemical containers, including for transport
• Heat Exchangers
• Woven or welded screens for mining, quarrying & water filtration
• Threaded fasteners
• Springs

 

 

 

 

 

304 Stainless Steel Scrap available in Hong Kong

Bulk Packing

 

20-21 tons loaded in 20 foot Container 

 

  

1. Metal Scrap 304 Stainless Steel Scrap metal scrap for sale   . The goods sent out with in 5- 14 working days after confirming your payment. But sometimes the delivery will be delayed due to the shortage.However, we’ll inform you in time by email.

 

2. The most timely: All emails and message in Trade Manager , MSN and skype, viber whatsapp  will be answered within 24 hours.

 

3. The most professional: Our Team will answer you any puzzling question before your order.

 

4. The most comprehensive: We will offer you the most passionate after service when you have any question.

 

Keyword: Metal Scrap 304 Stainless Steel Scrap metal scrap for sale

 

  

 

BHNTCP IMPEX

  

Shall you have any enquries or need full price list, feel free to contact us.

 

Tel +852 69019717/ +852 97174026 / +852 28918588 / +852 31702589

Wechat/ Viber /Whatsapp ID 852 69019717 / Skype ID Bhntcp

 

Metal Scrap 304 Stainless Steel Scrap metal scrap for sale