Fujikura FSM-60S Fusion Splicer

Applicable type of fibers

SM (ITU-T G.652)
MM (ITU-T G.651
DS (ITU-T G.653)
NZDS (ITU-T G.655)

Fiber Count

Single

Applicable fiber dimensions

Cladding Diameter: 80 to 150µm.
Coating diameter: 100 to 1000µm

Fiber setting and cleaved length

Sheathe clamp A (standard): For coating dia. up to 250µm (8 to 16mm cleave), coating dia. of over 250µm (16µm cleave)
Sheathe clamp B (option): For coating dia. up to 1000µm (8 to 16mm cleave)
Sheathe clamp C (option): For 900µm dia. loose tube fiber (8 to 16mm cleave)
Fiber holder (option): FH-60-250 and FH-60-900 (10mm cleave)

Splicing modes

Total 100 modes

Typical splice loss

0.02dB with SM
0.01dB with MM
0.04dB with DS
0.04dB with NZDS
(Measured by cut-back method relevant to ITU-T standard)

Return loss

>>60dB

Splicing time

Typical 9 sec. with SM FAST
10 sec. with SM AUTO
13 sec. with AUTO modes with standard SM (ITU-T G.652)

Arc Calibration Method

Automatic
Real-time and by using results of previous splice when in AUTO mode
Manual arc calibration function available

Splice Loss Estimate

Available

Attenuation splice function

Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.

Tube heater / heating time

Built-in tube heater with 30 heating modes / Typical 30 sec. with Fujikura FP-03

Applicable protection sleeve

60mm 40mm and Fujikura FPS01 series

Storage of splice result

the last 2000 results to be stored in the internal memory

Tension test

1.96 to 2.25N

Operating condition

0 to 5,000m above seal level, 0 to 95%RH and -10 to 50ºC and up to 15m/s wind velocity, respectively

Storage Condition

0 to 95%RH and -40 to 80ºC respectively. Battery: -20 to 30º for long term

Dimensions

136Wx161Dx143H (mm) excluding rubber foot

Weight

2.3kg with AC adaptor ADC-13
2.7kg with battery BTR-08.

Viewing method and display

Two CMOS cameras and 4.1" color LCD monitor

Fiber view and magnification

X/Y (300X magnification), or both X and Y simultaneously (187X magnification)

Power Supply

Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08

No. of splice cycles with battery

Typical 160 cycles (splice / tube heat) with BTR-08

Electrode Life

2500 arc-discharges

Terminals

USB 1.1 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply