Calibration Infrared Laser Thermometer

  Calibration Infrared Laser Thermometer

• Measurement range : -50°C to 700°C(-58°F to 1292°F)
• Accuracy : 0°C~700°C(32°F~1292°F):±1.5°C(2.7°F)  or 1.5% ,-50°C~0°C(58°F~32°F):±3°C(±5°F) Whichever is greater
• Resolution : 0.1°C or 0.1°F
• Distance to spot size : 12:1
• Repeatability : 1% of reading or 1°C
• Operating Humidity : 10~95%RH non-confensing up to 30°C(86°F)
• Spectral response :  (8-14)um
• Response Time : 500ms
• Emissivity :0.95(Pre-Set)
• Power :9V Alkaline or NiCd battery

• Typical battery life(Alkaline):Non-laser mode; 22 hrs ,Laser models:12hrs

• Storage Temperature: -20~60°C(-4~140°F)

• Size :175*100*49mm 

• Weight :220g

A:Press SET key to save setup

B:Date storage :when selected STO ,lock &data&1 indicator will show when press SET key,After temperature read out press STO/CAL key to store.then 2 memory unit will be shown,there 12 groups memory unit available,To recall the stored date in normal measuring mode by pressing STO/CAL key remove all data by pressing STO/CAL keys for 3 seconds

C:Laser/back light button.When backlight is on,any operations will remain back light for 10 seconds

LCD indicate on/off status

D/F:High temperature alarm:when selected HAL Press D/F to set high temperature alarn trigger and confirmed by pressing SET key.Low temperature alarm:when selected LAL,press D/F to set low termperture alarm trigger and confirmed by pressing SET key

E:Key functions:press MODE key ,LCD subdisplay blinks MAX-MIN-AVG-HAL-LAL-STO-EMS segment(only main display means normal measuring mode)press SET enter

G:Trigger:when turn on LCD distplay Verxx software version for 1 sec,And turn to display reading with SCAN icon,Release the trigger ,dispaly reading with HOLD icon,Buit in auto power off in 7 sec.

H:Clesius/Fahrenheit switch :Please open battery and push the slide switch for convertsion

1.Infrared thermometer          1PCS

2.Manual English         1PCS

3.Battery 9V           1PCS

4.Gift box           1PCS

Maintenence

1.Lens Cleaning

Blow off loose particles using clean compressed air,Gently brush remaining debris away with a moist cotton swab,The swab maybe moistened with water

2.Case cleaning

Clean the case with a damp sponge/cloth and mild soap

Note:

1)Do not use solvent to clean plastic lens

2)Do not submerge the unit in water