Wellcome you to Beijing Guanghui Textile Co.Ltd

High Tensile Strength PVA Fiber for Fiber Cement Roofing Panel

PVA fiber is short for polyvinyl alcohol fiber. With polyvinyl alcohol as its raw material, PVA fiber is a high strength and modulus fiber produced by a special process. It has advantage of high strength, high modulus, low elongation, good dispersing, acid and alkali resistance, wear-resistance, UV resistance and corrosion resistance. It also has good combination with cement, thus it can be used as all types of reinforcing materials. Now it is widely used in many construction field, such as dam of water project and hydraulic power, basement, harbour engineering, concrete slab and so on.

 Specifications:

Function of PVA Fiber:

1.It has good mechanical character,can improve the strength and impact of the architectural materials.

2. It has good performance of acidoresistance and it is suitable for all cements.

3. It has good disperstiveness.

4. The deflection temperature and the cold resistance of the cement board and cement bricks can be increased 50%.

5. Improve operating conditions.

Use instruction:

1. Mixing amount: Only one-fifth of asbestos.

2. Stirring requirement: It is no need to change the proportion of cement, sand and aggregate.

For cement concrete: crushed stones, fibers, cement and sand are put into the blender and stir for 30 seconds, then put water and stir for 1 minute.

For  asphalt concrete: Put crushed stones, sand and fibers into the blender and stir for 20 seconds. Then put the asphalt and stir up. The total time of stirring is not less than 60 seconds.

Packing & Shippment:

Shippment: within 20-25days after depoist

Application Field:

1. The road, surface of road, bridge floor, runway and floor of the factory.

2. Port, deepwater wharf, project in the severe cold area.

3. Anti-collision wall of highway, anti-impact board.

4. Reservoir, swimming pool.

5. Side wall and roof of the basement.

Welcome you inquiry.