Automatic alarm temperature Temperature sensing alarm GSM alarm

The alarm system based on GSM wireless SMS and voice function platform to complete the remote alarm data transmission and control, system according to the master set patterns of protection, when the detector detects the intrusion signal after the alarm signal is sent to the alarm host, the host immediately to the user preset good mobile phone number to send alarm messages, and automatically dial the preset the telephone number of voice alarm, the other users can through remote dial host number of arm / disarm remote control system.

Function characteristics:

1, support apple, Android and other mobile phone intelligent control software (APP);

2, the host machine adopts ARM processor;

3, the capacitance induction touch key, can control the host arm / disarm / at home through the keyboard (part of) the deployment;

4, the host of code: learning mode;

5, two-way communication, can be used for mobile phone use (through the touch keyboard outward call any phone number);

6, 24 wireless zone, 6 Fire Zone, 6 emergency zones and 2 wired zones; 14 remote control;

7, support six kinds of speech and language (English, Russian, German, West, switch, method);

8, can be set to three SMS alarm and three groups of telephone alarm number;

9, delay alarm function (optional 0-60 seconds);

10, the host alarm ring the alarm time optional (0-254 seconds or ringing);

11, with wireless transmitting function, can control 99 wireless alarm;

12, remote SMS and telephone keypad control host;

13, the host with the home protection function;

14, can record 10 seconds warning voice;

15, the external power supply off / recovery alarm function (can be open or closed choice);

16, remote alarm tone cloth / Chefang function (can be open or closed choice);

17, the remote controller and the panel cloth / Chefang message function (can be open or closed choice);

18, two electric switch controlled by wireless transmission

Performance index:

1, radio frequency: 315MHz/433MHz (optional);

2, the frequency of GSM: 850/900/1800/1900MHz;

3, the data response time: less than 10 seconds (GSM network normal state);

4, a working power supply:

The power supply voltage: input: AC 100-240V 50Hz/60Hz; the output: DC 12V/1A;

Standby power: < 0.6W;

Backup battery: DC7.4V/850MA;

Working time: 10 hours of standby battery;

5, working conditions:

Temperature: -20 ~ +55 is less than or equal to 90% DEG C humidity: no condensation;

6, size: 187mm (L) * 130mm (wide) x 27mm (thick);

7, recording time: 10 seconds;

Standard configuration:

1 X G2 host

1 X radio built-in antenna infrared probe

1 X radio built-in antenna magnetometer

2 X metal remote controller

1 X power adapter

1 X built-in rechargeable lithium battery

1 X description