FAG Cylindrical roller bearings NJ216-E-TVP2

Description:

• Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or no ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers from coming into contact with each other during rolling.
• The cage type bearings are very rigid, can support high radial loads and suitable for higher speeds than the full complement designs.
• The bearings are separable and are easier to fit and dismantle. Both bearing rings can be given a tight fit by this process.
• Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings
• Cylindrical roller bearings NJ are semi-locating bearings. Semi-locating bearings can support not only high radial forces but also axial forces in one direction and can therefore guide shafts axially in one direction. They act as non-locating bearings in the opposite direction. The bearings have two ribs on the outer ring and one rib on the inner ring.

Feature:

• single row,
• high radial loads
• full complement cylindrical roller set
• low friction,long service life
• vibration resistance
• easy assembly

Dimension:

.

 The same series model selection: