Custom Ductile Iron Casting Process Pipeline Sluice Valve BS5163 ANSI class 125 , class 150

Delivery Time:30days after receiving your down-payment
Certification:CE/ISO
Custom Ductile Iron Casting Process Pipeline Sluice Valve BS5163 Specifications

Resilient seated gate valve
Material : Ductile
Design standard : BS5163
Flang drilling : ANSI class 125, class 150

Brief Introduction

Sluice valve is kind of widely used block valve with large range of working pressure and temperature, used for stopping or connecting the medium inside of pipeline. Sluice valve concludes rising stem sluice valve and non-rising stem sluice valve. Sluice valves are characterised as having either a rising or a nonrising stem. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn\'t be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry.

Product Features

The channel inside of valve is straight, low flow resistance.
No matter open or close, valve disc always moves perpendicular to the direction of flow, easy to switch.

The lifting of disc based on the motion of stem, long stroke, therefore, it will cost long time to switch, but avoided the existence of water hammer. 
Both sides of channel is symmetrical, mediums can flow toward two directions, easy to install.
 

Classification of sluice valve

Material: cast iron, cast steel, stainless steel, cast copper.
Valve stem structure: rising or nonrising
Seal type: rigidity seal or soft seal
Connection: flange, wafer, thread
Driven type: handle, electric pneumatic.

Z41 rising stem sluice valve and Z45 nonrising stem sluice valve

1. Rising stem sluice valve: valve nut is at cover or bracket, rotate the nut to realize lifting of valve stem, this kind of structure is conducive not only lubrication of stem but also have a distinct open or close degree, and now it has been widely used.
2. Nonrising stem sluice valve touch with mediums directly, suitable for installation underground or where vertical space is limited. The disadvantages of this structure is that thread will be corroded or damaged.
 

The different between rising stem and nonrising stem sluice valve

Rising stems provide a visual indication of valve position because the stem is attached to the gate such that the gate and stem rise and lower together as the valve is operated. Nonrising stem valves may have a pointer threaded onto the upper end of the stem to indicate valve position, since the gate travels up or down the stem on the threads without raising or lowering the stem. Nonrising stems are used underground or where vertical space is limited.

Adoption Standard

Item	Standard
Design Manufacture Acceptance	GB/T12234
Valve structure length	GB/T12221
Valve flange connection	JB/T79
Valve inspection	JB/T9092

Performance Parameter

Name of article	Flange Cast IronGlobe Valve
Connection	Flange
Nominal Diameter	DN25-DN600
Nominal Pressure	PN16/PN25/PN40/PN64
Test Pressure	Housing test:PN×1.5 Seal test:PN×1.1
Surface Treatment	Stainless steel body,other coatings
Applicable Temperature	≤450°C
Applicable Mediums	Water, Oil, Gas,Steam and so on.

Optional Materials for Parts

Parts name	Optional Materials
Body Cover	Stainless steel CF8/CF8M/CF3M, WCB, Cast steel WCB Cast iron (QT450)
Ball	CF8(P) CF8M(R) CF3M(RL),  Cast steel Cast iron bronze inlaid
Seat	Valve Body, Stereoplasm Alloy, Bronze inlaid
Shaft	Stainless steel 3046SS,316SS,416SS
Seal surface