99.5% N - Butyl Acrylate CAS 141-32-2 Colorless Liquid 2- Propenoic Acid Butyl Ester

 
N-Butyl Acrylate , Cas No. 141-32-2,for coating , inks , adhesives , sealants , textiles , plastics and elastomers
 
 
I. Quick Detail:
 

 
 
II. Description:
 
Product Name: Butyl Acrylate
Other Names: BA, 2-Propenoic acid butyl ester; Acrylic acid n-butyl ester; Butyl 2-Propenoate; n-Butyl acrylate, stabilized with 20 ppm MEHQ; n-Butyl acrylate; Propenoic acid n-butyl ester
Molecular Formula: CH2CHCOOC4H9, C7H12O2
CAS NO.: 141-32-2
EINECS No.: 205-480-7, 138-1491-8216
HS Code: 2916123001
UN No.: 2348
Hazard Class: 3
Packing Group: Ⅲ
Appearance: colorless and clean liquid
Odor: sharp characteristic fruity odor
Molar mass 128.1616
 
III. Properties:
 
Melting point: -64℃.
Initial boiling point and boiling range: 145-149℃.
Flash Point: 36℃ (Closed cup).
Explosion Limits (vol% in air): 1.3%-9.9%.
Vapour pressure, kPa at 20℃: 0.43
Relative vapor density (air=1): 4.42
Relative density (water = 1): 0.90
Relative density of the vapour/air-mixture at 20℃ (air=1): 1.01
Solubility in water: 0.14 g/100ml.
Octanol/water partition coefficient as log Pow: 2.38
Auto-ignition temperature: 267℃.
Viscosity: 0.88mPa s (dynamic).
 
IV. Feature:
 
Butyl acrylate is a colorless liquid with a sharp odor. It is readily miscible with most organic solvents.
It is a flammable liquid and vapor. Its vapors are heavier than air and may travel a long distance and accumulate in low lying areas. It should be kept away from heat, sparks, flame and any sources of ignition.
Butyl acrylate is stable under recommended storage conditions. Elevated temperatures can cause hazardous polymerization, so butyl acrylate has inhibitors added to reduce the probability of polymerization.
 
V. Process
 
Butyl acrylate is normally produced by a simple reaction between acrylic acid and n-butanol, with water as a byproduct.
 
VI. Applications
 
Butyl acrylate is primarily used in the production of coatings and inks, prints, adhesives, sealants, textiles, plastics and elastomers. Its applications are as below:
1. Coatings – for textiles and adhesives, and for surface and water-based coatings, and coatings used for paints, leather finishing and paper.
2. Paints- for latex paint formulations, acrylic polymers have good water resistance, low temperature flexibility and excellent weathering and sunlight resistance.
3. Adhesives – for use in construction and pressure-sensitive adhesives.
4. Chemical intermediates – for a variety of chemical products, mainly used in the production of homopolymers and co-polymers such as acrylic acid and its salts, esters, amides, methacrylates, acrylonitrile, maleates, vinyl acetate, vinyl chloride, vinylidene chloride, styrene, butadiene and unsaturated polyesters.
5. Leather – to produce different finishes, particularly nubuck and suede.
6. Textiles – in the manufacture of both woven and non-woven textiles.
7. Plastics – for the manufacture of a variety of plastics.
 
VII. Specification:
 

 
VIII. Why chooses our product?
 
1. Huge Export Record:
Our annual export volume for butyl acrylate is nearly thousands of tons, and the data keeps rising.
 
2. Wide Ranges of Market Coverage:
Our sales network covers most major countries and areas of the world, including:
North America: America, Mexico etc.
Central America: Costa Rica, Guatemala, Honduras, Panama, Nicaragua etc.
South America: Brazil, Argentina, Columbia, Chile, Peru, Uruguay, Guyana, Paraguay, Ecuador, Venezuela etc
Europe: Belgium, Romania