3phase Voltage Galvanized Steel Roll Forming Machine , Rolling Shutter Machine With Servo Feeding

Delivery Time:45 days after the down payment
Certification:CE

Fully Auomatic Galvanized Steel Stud and Track Roll Forming

Machine with Servo Feeding and Punching
 
 

Description
 
1. The stud and track roll forming machine produces studs and tracks. The products of the stud and track forming machine are widely used as the supporters in ceiling, roofing, wall construction, etc. The whole line speed of the stud and track forming machine can be reached at 45m/min or more. If you need higher efficiency, we recommend you used the flying shear with non-stop.
 
2. The machine mainly consists of decoiler, guiding equipment, roll forming system, post-cutting equipment, hydraulic station, control system, etc. We also design the machine in accordance with customer's request.

 
Technical Specifications of the Machine
 

1	Raw material	PPGI,GI,Al
2	Width of material	depend on profiles
3	Material thickness	0.4-0.8mm
4	Forming speed	8-10m/min, Max. 20m/min(not including cutting and punching time)
5	Roller station	12-20 (depends on profile drawing)
6	Main power	15KW
7	Hydraulic station power	4KW
8	Control system	PLC (Panasonic brand) control system
9	Roller material	GCr15 quench treatment HRC58-62°
10	Shaft material	40Cr Tempering treatment HRC48-52°
11	Shaft diameter	75mm
12	Cutter material	Cr12 mould steel with quenched treatment
13	Dimension	as customer's request
14	Weight	About 10 T
15	Voltage	380V 3phase 50HZ or as your requirements
16	Working time	Can be 24 hours
17	Workers	1-2 only
18	Length of product controlled	By encoder(OMRON)
19	Cutting Tolerance	10m+-1.5mm
20	Transmission	By chain or gearbox

 
 
 
Advantages
 
1. Excellent  quality
2. Reliable
3. Reasonable price
4. Good after service
5. 1 Year Warranty
6. More than 15 years experience
7. Simple structure
8. Customerized ,CE approvial
 
 
 
Working Flows

 
Main Pictures Show