Coated Panel Car Spray Booth Air Flow Electric Controlled With Heat Recovery System

Delivery Time:15-20 working days
Certification:CE, TUV

Coated Panel Car Spray Booth Air Flow Electric Controlled With Heat Recovery System

Features

1. With heat recuperation system, energy save and more efficiency.

2. 0.6mm coated steel with rock wool inside for wall panel.

3. Quality brand name turbo fans, directly drive type

4. Riello RG5S diesel burner with a heating productivity of 260000Kcal/h

5. Pneumatic damper for spraying to baking cycle.

6. Double layer heat exchanger.

7. Siemens motors.

8. Electric damper for intake and exhaust, control the air flow.

Advantage

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. In the meantime, heat recuperation system start working,energy save and temperature raise fast. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter.

Item	Detailed Specification
Inside dimension	7000×4000×2800 mm (L×W×H)
Outside dimension	7120×5520×3750mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2750 mm (W×H), without frame, square window frame, orange colour, door head and two batten on both sides white colour, with safety escape door lock.
Emergency door	1 units, 800×2000mm (W×H), colour: white, with safety escape door lock.
Basement	Galvanized steel assemble, 350mm high, galvanized steel bending support, full grilles made by flat bar 30×5 and twisted steel, galvanized, 3 ramps, 900×2500mm/pc, silver colour.
Wall panel	Thickness: 60mm, both sides covered by coated steel, thickness 0.6mm, with rock wool inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, both sides lights: 7Units×4Pcs=28Pcs×36W, back side lights: 4Units×4Pcs=16Pcs×36W, LED light tube.
Generator cabinet	Intake from back upper, exhaust from rear upper, galvanized steel frame; white powder coated panel covered, filled with heat preservation material PU inside.
Intake and Exhaust system	Inlet: 1×7.5KW turbo fan, Siemens motor, air capacity for each fan: 25000m3/h, electric damper.
	Outlet: 1×7.5KW turbo fan, Siemens motor, air capacity for each fan: 25000m3/h, electric damper.
Heating system	Italy RIELLO RG5S diesel burner, double layer stainless steel heat exchanger, pneumatic damper actuates from spraying to baking cycle. Max. heating productivity: 260000kcal/h, with heat recovery system.
Purification system	Pre-filter (pocket type), ceiling filter, fibreglass filter, activated carbon filter (pocket type)
Roof	50mm rock wool panel.
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, pressure gauge, all motors reduced-voltage starting.
Total power	17KW (Power supply 1×220V, 3×380V, 50HZ)