Straw Color Wave Roof Tile Making Machine for Mgo / Mgcl / Fiber Glass Mesh Raw Material

Straw color wave Roof Tile Making Machine for Mgo / Mgcl / Fiber Glass Mesh Raw Material
 
Mgo roofing tile forming Machine,mgo roofing tiles making machine
 
1. Introduction for roof tile machine:  
 
Straw color wave roof tile forming machine can produce pantile with all kinds of
 waves and heat-preserving layer, which will be used at the roof as the substitute
 of traditional asbestos tile, color steel tile and cement tile. There is asbestos in the 
asbestos tile which include carcinogen. 
 
Product features
The product manufactured by this equipment has following features: fireproof, 
waterproof, environmental protection and no toxicity, at the same time it is 
resistant against acid, alkali and aging. This product can be nailed, planed,
 sawed and sticked. In view of that its fireproofing grade is A, so our product will
 not be combustible when the fire is 800-1000°C.At the same time, when our 
product is fell into the water for a week, there are not the following phenomenon
 such as chalking, deformation and warp. In light of there is not glue in the raw
 materials, so there is not formaldehyde and benzene for our boards.Rich color 
and never fading
 
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high pressure during 
production processing. The board will be
 formed at one time after rollerextruding under the conditions of normal 
temperature and normal pressure. This is a green environmentalprotection project,
 because that there is no waste water, waste materials and waste gas during its
 production processing. The finished board don’t need high temperature drying,
 airdrying and watering, and under the normal temperature, they will dry well 
indoor.  
Product features:
The Mgo roofing tile manufactured by this equipment has following features: fireproof, waterproof, environmental protection and no toxicity, at the same time it is resistant against acid, alkali and aging. This product can be nailed, planed, sawed and sticked. In view of that its fireproofing grade is A, so our product will not be combustible when the fire is 800-1000°C.At the same time, when our product is fell into the water for a week, there are not the following phenomenon such as chalking, deformation and warp. In light of there is not glue in the raw materials, so there is not formaldehyde and benzene for our boards.
Rich color and never fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high pressure during production processing. The board will be formed at one time after roller-extruding under the conditions of normal temperature and normal pressure. This is a green environmental-protection project, because that there is no waste water, waste materials and waste gas during its production processing. The finished board don’t need high temperature drying, air-drying and watering, and under the normal temperature, they will dry well indoor.
  
Equipment Model and Product Specification
According to different production, our equipment has 6 models for large-scale, middle-scale and small-scale. Our all equipment can produce board with same quality and specification but different production.
Customers can adjust the specification of the pantile according to different requirements, the standard specification is 1.8mX0.72m, the biggest length is 6 m, the thickness is 3mm~6mm generally. In addition, this equipment can produce the pantile with heat-preserving layer.
 
Main characteristics
1. PLC computer control
2. no noise, no shake 
3. hydraulic system
4. easy operation
5. maintenance free
Main equipment
1. Automatic bottom glue spraying equipment
 
 2. Automatic sand blasting room
 
 3. First drying room
 
 4. Automatic surface glue spraying equipment
 
 5. Second drying room equipment component