The new 200 ton cement silo

1. Working principle: storage silo cement silo for the reception of sealed tanker pneumatic conveying of bulk cement, through the storage bin of the pneumatic ash pump will be transported to the cement batching warehouse, and through the dosing equipment to be expected to carry the material below the conveyor.

2. Installation Notice:

(1) Cement bin body should be installed in the field before the installation of two of the basis for elevation leveling, for the same Silo Foundation error larger fulcrum should be at the highest elevation of low point of treatment, the ultimate goal is to ensure that the center of the cement bin body vertical placement, its central axis must not appear tilt.

(2) The cement storehouse body is equipped with the craft support in the delivery, the installation should be in advance to demolish.

(3) The cement bin body can be assembled at the level of the components should be assembled as far as possible, in the warehouse body erected after the anchor Bolt fixed before the warehouse body should not have personnel activities to avoid danger.

(4) Storage bin, batching bin due to the position of feed and ladder position limit, the two equipment relative to the basis of a slightly different location, should be noted when installing.

(5) The electric part of the cement storehouse system uses the safe operation voltage DC24V except the vibrating motor, but does not have the electric operation on the wiring and the overhaul, lest in the operation process the short circuit fault causes the component to burn.