Best Selling Processing Machinery for Making Cassava Starch

The Introduction of Cassava Starch Processing machinery

Cassava contains high starch.  If  Cassava is made into starch, it has gone through several steps. Cassava starch is kind of  white powder that is dewatered and dried  after starch extraction.

cassava starch processing machinery

Technical process:

Fresh cassava - Cassava cleaning and washing - Grinding - Starch extraction -  Filtering and de-sanding - Starch concentration and purification - Dewatering – Drying-packing

Machine order

Dry sieve - Paddle washer - Cutting machine - Rasper - Centrifuge sieve - Fine fiber sieve - Disc separator - Hydrocyclone – peeler centrifuge  - Flash dryer-cassava packing machine

The Functions of Main Equipments the Process of Cassava Starch Processing  machinery

 Cleaning parts of cassava starch processing machinery

Widely used in impurities pre-removal for starch production. It's used to remove dirt, sand, small stones, weeds and other impurities that are attached on the surface of cassavas.

Mainly used  to wash the raw materials. Adopted countercurrent washing principle. By the effect of paddle pushing, the raw material flows in the converse direction against water currently, which makes washing completely and eliminate sand and mud at most.

Crushing parts of cassava starch processing machinery:

 Its main function is cut cassavas into small pieces, 3-5cm, for further processing. It consists of foundation, main frame, cutters, ,motor and drive system.

It breaks the materials, crush cassavas into slurry, release starch particles from cell, with high starch dissociation rate. The machine with high speed has high coefficient and high extraction rate

Starch extraction of cassava starch processing  machinery:

Then centrifuge sieve is used for the extraction of starch from the materials, remove fiber from starch slurry. the machine with automatic front and back washing system guarantee good screen penetration and high-efficiency operation.

Starch filtering and de-sanding of cassava processing machinery:

It is a machine mainly for separating small particles of fiber from starch slurry. This process is achieved by gravity of the slurry and screen mesh inside the drum.

Disc separator: It is widely used in processing of starch to separate protein and cell liquid out of slurry, with high separating factor.

 It is designed to get rid of related substances such as fiber and protein in the starch milk. For the starch's washing, concentration and purification

 Dewatering and drying system of cassava starch production machinery:

It is a solid-liquid separation equipment which adopts continuous operation and intermittent discharging. The final starch water content is 38%-42%.

This is the last step for cassava starch production. It adopts low temperature drying system, which will prevent starch gelatinization. Final starch water content is 12%-14%.

In short, this is the complete cassava starch processing line

Welcome to make an inquiry of our machine by following contacts:
Contact: Ms Elina
Email: sales@doingmachinery.com                                            
Tel: 0086 371 5677 1822                                                 
Whatsapp/Phone:008613526615783                                                 
Website: