80-100 T/h Sand Washing Machine Sea Washing Plant Machine

Features:

1. bucket wheel sand washing machine is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoid in a large degree that the bearings are damaged by being soaked with water, sand or some polluted things. 
2. When bucket wheel sand washing machine is used for cleaning sand in quarries, it has many advantages compared with the traditional spiral one. 
3. There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as "sand for construction" and "cobble and broken stones for construction". 
4. There are no other wearing parts except the screen mesh. 
5. It features of long service life and few times for maintenance.

Advantages:

1. Bucket wheel sand washing machine structural simplicity, the impeller drive bearing device isolation material with water and water bearing due largely avoided by soaking, sand and pollutants cause damage occurred.

2. Sand Washing Machine Equipment is used with traditional spiral sand washing machine when compared to wash sand gravel pits about advantages: First, very little loss of fine sand and powder. Secondly, bucket wheel sand washing machine except the screen has almost no wearing parts. Finally, bucket wheel sand washing machine long life, long-term without maintenance.

3. It has reasonable structure, convenient maintenance, large capacity, power consumption is small, clean and high. Novel sealing structure, the whole block oil bath gear, adjustable overflow weir plate, to ensure that the product efficiency, durability, cleaning, dewatering effect is good, fine products to maintain chaos and so on.

Description:

The efficient Wheel Sand Washer is a kind of cleaning equipment of international advance level for sand and slag pellets, developed on the basis of introducing foreign outstanding technology of the same kind of products. Sand washing machinery drives the impeller in the water groove to move like a circle transmitted by electric motor and decelerator, and then mixes, overturns, cleans and discharges the sand or slag pellets in the water groove. It is of simple structure. The bearing device of impeller drive is separated from water and materials with water, to avoide in a large degree that the bearings are damaged by being soaked with water, san or some polluted things. When it is used for cleaning sand in quarries, it has many advantages compared with the traditional spiral one. There is little loss for medium-sized and fine sand and stone powder. The grade and the fineness of the sand for construction after being washed can be up to the national standards, such as “sand for construction” and “cobble and broken stones for construction”. There are no other wearing parts except the screen mesh.5. It features long service life and easy maintenance.