Home > Products > Communication equipment > Baudcom 40Gb/s 40km QSFP+ Transceiver
Baudcom 40Gb/s 40km QSFP+ Transceiver
- 1000 Unit / Units per Month
- Shanghai
- T/T L/C D/P D/A Credit Card PayPal Other
- RF Testing Wire Cable Assembly SMA Male Female connector
- 50 Watt Dummy Load/Termination Low PIM3 -150dBc N male/female
- high power good PIM -150dBc RF Coaxial Fixed Dummy Load/Termination 200W
- good low PIM3 -150dBc RF Coaxial Fixed Dummy Load/Termination 50W
- 800-2500MHz 3x2 3 in 2 out Hybrid Combiner n female type DC-3Ghz
- RF 800-2700MHz 2 in 1 out 2x1 3dB Hybrid Coupler Combiner N Female type
Product Details
Brand Name: | baudcom | Place of Origin: | China | Model Number: | 1 |
Product Description
Description:
The BD-OPQC40 is a transceiver module designed for 40Km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels(ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
The module operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals such as Module Present, Reset, Interrupt and Low Power Mode are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to obtain digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
This product converts the 4-channel 10Gb/s electrical input data into CWDM optical signals (light),
by a driven 4-wavelength Distributed Feedback Laser (DFB) array. The light is combined by the
MUX parts as a 40Gb/s data, propagating out of the transmitter module from the SMF. The receiver
module accepts the 40Gb/s CWDM optical signals input, and de-multiplexes it into 4 individual
10Gb/s channels with different wavelength. Each wavelength light is collected by a discrete avalanche photodiode (APD), and then outputted as electric data after amplified first by a TIA and then by a post amplifier.
The BD-OPQC40 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Features:
2 4 CWDM lanes MUX/DEMUX design
2 Up to 11.2Gbps per channel bandwidth
2 Aggregate bandwidth of > 40Gbps
2 Duplex LC connector
2 Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard
2 QSFP MSA compliant
2 Up to 40km transmission
2 Compliant with QDR/DDR Infiniband data rates
2 Single +3.3V power supply operating
2 Built-in digital diagnostic functions
2 Temperature range 0°C to 70°C
2 RoHS Compliant
Applications
2 Rack to rack
2 Data centers Switches and Routers
2 Metro networks
2 Switches and Routers
2 40G BASE-ER4 Ethernet Links
l Absolute Maximum Ratings
Parameter | Symbol | Min. | Typical | Max. | Unit |
Storage Temperature | TS | -40 | +85 | °C | |
Supply Voltage | VCCT, R | -0.5 | 4 | V | |
Relative Humidity | RH | 0 | 85 | % |
l Recommended Operating Environment:
Parameter | Symbol | Min. | Typical | Max. | Unit |
Case operating Temperature | TC | 0 | +70 | °C | |
Supply Voltage | VCCT, R | +3.13 | 3.3 | +3.47 | V |
Supply Current | ICC | 1100 | mA | ||
Power Dissipation | PD | 3.5 | W |
l Electrical Characteristics (TOP = 0 to 70 °C, VCC = 3.135 to 3.465 Volts)
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Data Rate per Channel | - | 10.3125 | 11.2 | Gbps | ||
Power Consumption | - | 2.5 | 3.5 | W | ||
Supply Current | Icc | 0.75 | 1.1 | A | ||
Control I/O Voltage-High | VIH | 2.0 | Vcc | V | ||
Control I/O Voltage-Low | VIL | 0 | 0.7 | V | ||
Inter-Channel Skew | TSK | 150 | Ps | |||
RESETL Duration | 10 | Us | ||||
RESETL De-assert time | 2000 | ms | ||||
Power On Time | 2000 | ms | ||||
Transmitter | ||||||
Single Ended Output Voltage Tolerance | 0.3 | 4 | V | 1 | ||
Common mode Voltage Tolerance | 15 | mV | ||||
Transmit Input Diff Voltage | VI | 150 | 1200 | mV | ||
Transmit Input Diff Impedance | ZIN | 85 | 100 | 115 | ||
Data Dependent Input Jitter | DDJ | 0.3 | UI | |||
Receiver | ||||||
Single Ended Output Voltage Tolerance | 0.3 | 4 | V | |||
Rx Output Diff Voltage | Vo | 370 | 600 | 950 | mV | |
Rx Output Rise and Fall Voltage | Tr/Tf | 35 | ps | 1 | ||
Total Jitter | TJ | 0.3 | UI |
Note:
1. 20~80%
l Optical Characteristics (TOP = 0 to 70°C, VCC = 3.135 to 3.465 Volts)
Parameter | Symbol | Min | Typ | Max | Unit | Ref. |
Transmitter | ||||||
Wavelength Assignment | L0 | 1264.5 | 1271 | 1277.5 | nm | |
L1 | 1284.5 | 1291 | 1297.5 | nm | ||
L2 | 1304.5 | 1311 | 1317.5 | nm | ||
L3 | 1324.5 | 1331 | 1337.5 | nm | ||
Side-mode Suppression Ratio | SMSR | 30 | - | - | dB | |
Total Average Launch Power | PT | - | - | +10.5 | dBm | |
Average Launch Power, each Lane | -2.7 | - | +4.5 | dBm | ||
Difference in Launch Power between any two Lanes (OMA) | - | - | 6.5 | dB | ||
Optical Modulation Amplitude, each Lane | OMA | -0.7 | +5 | dBm | ||
Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane | -1.5 | - | dBm | |||
TDP, each Lane | TDP | 2.6 | dB | |||
Extinction Ratio | ER | 5.5 | - | - | dB | |
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | |||||
Optical Return Loss Tolerance | - | - | 20 | dB | ||
Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | |||
Relative Intensity Noise | Rin | -128 | dB/HZ | 1 | ||
Receiver | ||||||
Damage Threshold | THd | 3.8 | dBm | 1 | ||
Average Power at Receiver Input, each Lane | R | -21.2 | -4.5 | dBm | ||
Receiver Power (OMA), each Lane | -1 | dB | ||||
RSSI Accuracy | -2 | 2 | dB | |||
Receiver Reflectance | Rrx | -26 | dB | |||
Receiver Power (OMA), each Lane | - | - | 3.5 | dBm | ||
Stressed Receiver Sensitivity in OMA, each Lane | - | - | -16.8 | dBm | ||
Receiver Sensitivity(OMA), each Lane | Sen | - | - | -19 | dBm | |
Difference in Receive Power between any two Lanes (OMA) | 7.5 | dB | ||||
Receive Electrical 3 dB upper Cutoff Frequency, each Lane | 12.3 | GHz | ||||
LOS De-Assert | LOSD | -22 | dBm | |||
LOS Assert | LOSA | -35 | dBm | |||
LOS Hysteresis | LOSH | 0.5 | dB |
Note:
1. 12dB Reflection
Contact Us
- Shanghai Baudcom Communication Device Co.Ltd
Communication equipment |
- RF Surface Mount Circulator Module From 0.45 ~4.2 GHz (SMT)
- UIY Wide Range RF Drop-in Isolator From 0.6 to 5 GHz (TAB)
- Full Band High Power RF Isolator From 0.8 to 2 GHz
- Low Frequency From 45 to 270 MHz VHF RF Isolator For Antenna And Satellite Communication Applications
- K band 18~26.5GHz Waveguide Circulator (WR42)
- Ka Band 10W High Isolation Microstrip Circulator 32-38GHz
- 225 to 400MHz Full Band VHF TAB Connector Drop-in Circulator
- Mini CCTV BNC single passive video balun connector HD-CVI/TVI/AHD Transceiver Cable
- rf coaxial connector indoor 6 way signal mode Splitter for cable and internet housing outdoor optical splitter CATV splitters
- Mini CCTV BNC single channel passive video balun connector for HD-CVI/TVI/AHD Transceiver Cable RJ45 CAT5 Data Transmitter
- coaxial connector F female attenuator adaptor 20db 18 db 16 db
- Cat5E Cat6 RJ45 Adapter Female to Female Coupler Connector
- Ethernet Network Adapter Cat 5e Cat5 Cat6 Cat7 8P Female To Female RJ45 Inline Coupler Connector
- SIM900 GSM GPRS module
- Dual Port 86*86mm UK Type 3M Face Plate RJ45 Network Cable Wall Plate for Network
- 86*86mm 3m RJ45 2 Ports Network Keystone Wall Face Plate For Cat6 Cable
- Communication Network RJ45 Wall Socket Face Plate 2 Port Dual Face Plate
- Factory Wholesale Telecommunication Ethernet Cable 1 Port Network Face Plate
- New Arrival Cat5E Cat6 RJ45 Keystone Jack 1 Port Usa Type Face Plate
- 86 Type Standard RJ45 Face Plate White Network Keystone With Face Plate
- Customized communication equipment aluminum alloy shell
- RF Filter 863MHz to 870MHz Cavity 868MHz Filter
- ZTE CC16B Control&Clock board for ZXSDR B8200 B8300 BBU ZTE CC CC16 CC16A CC16B CC2 CC3 CC17B
- Nokia 472748A FYGB GPS GLONASS Receiver Antenna 472748A
Popular Searches
- Adsl Modem Splitter
- rj11 rj45 adsl splitter
- wholesale adsl splitter filter
- rj45 rj11 splitter
- four ports faceplate
- adsl filter french
- Hdmi Wall Faceplate
- rj11 wall mount box
- krone 10 pair disconnection module
- Drop Clamp
- krone disconnection module
- adsl in line splitter
- wholesale adsl modem splitter
- adsl splitter for mdf
- adsl splitters rj11
- adsl splitters and filters
Find Similar Products By Category
- Telecommunications > Communication Equipment > Telecom Parts
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-