X6000 Series Load Modules,Network Test Modules,Network Performance Test

Port Number

4 * 1000M

8 * 1000M

16* 1000M

Port Rate

RJ45：10/100/1000M
SFP：100/1000M
COMBO ports

RJ45：10/100/1000M
SFP：100/1000M
COMBO ports

RJ45：10/100/1000M
SFP：100/1000M
COMBO ports

Physical

Status Indicators: Tx/Rx
Weight: 0.5kg
Size: 271mm x 35.5mm x 180mm 
Peak power requirement: 100W Max

Traffic Generation

Traffic generating based on port and stream, per port have 64 different streams
Each stream provide up to 4 saltus step domain with mode of increase, decrease and random
Accurate data rate regulation based on port and stream, support dynamic data rate regulation based on port
Each stream is capable of generating packets of Layer2, IPv4, IPv6, TCP, UDP, TCP-IPv6, UDP-IPv6, ICMPv4, ICMPv6, IGMPv2, ARP, Pause, Goose and custom
Each stream support multiple levels of VLAN and MPLS
Signature block is optional in each stream
Each stream supports user-defined packets and packet length from 60B to 16KB
Payload generation mode: Cycle, Incremented, Random

Traffic Statistics

Statistics results can be displayed in the form of data table and chart
Each port can receive up to 1024 streams
Traffic statistics based on streams:
TX/RX frame count, TX/RX rate count, RX frame Sequence miss count, RX frame IP payload check errors count, Maximum, minimum and average SF latency count, Maximum, minimum and average CT latency 
Traffic statistics based on ports: 
TX/RX frame count, TX/RX stream count, TX/RX rate count, RX frame IP header checksum errors count, RX frame FCS errors count, frames through user-defined filters count (filter patterns include VLAN, MPLS, PPPOE, ARP, IPv4, IPv6, TCP, UDP)

Traffic Capture

Each port provides 256M bits capture buffer
RX data frame capture
TX/RX control frame capture
Frame capture based on filter templet
Decode hundreds of protocols
Support captured frame search according to specific conditions
Intuitive display of frames’ features such as source IP address, destination IP address, type of protocol and etc.

Protocol Emulation

Layer 2-3 Protocol Emulation

Integrated IPv4 and IPv6 dual stack
Protocol emulation on RIPv2, RIPng, OSPFv2, OSPFv3, ISISv4, ISISv6, BGP4, PPPoE Client, DHCP Client, IGMPv2, IGMPv3, GMRP, 802.1x, LDP, 802.3ah

Layer 4-7 Protocol Emulation

Data

Each port supports wire-speed traffic generation
TCP connections per second: 2 Million 
TCP concurrent connections:32 Million
Support HTTP
Support FTP

Support comprehensive multilayer testing though Layer 2 ~ 7

Software Support

TeleExplorer test system 
TeleAPP - Test suit of RFC 2544/RFC 2889/RFC3918

Chassis Available

TestStorm200

Others

Easy-to-use graphical user interface
Support TCL API for customizing tests