ADSS&OPGW Tension Set

Dead end grip for ADSS(ANZ)
 

Component

Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.
 

Characteristic

1. Stress is distributed equally, without stress focus. It can protect optical cables very well.

2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.

3. The grip power for the cable is not less than 95% of rating's pulling resisting intensity of the optical cable, completely satisfying the needs of setting up the cable.
 

Conditions For The Usage

1. Terminal poles/towers;

2. Poles/towers with corner angles greater than 25°

3. Conjoint poles/towers of the optical cables or poles/towers with larger differences in terms of height.
 

Intensity

According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.
 

Select Chart

Note: representing the outer diameter of the optical cable (mm).