Making good quality vertical insulating glass production line

Product Application

This production line is composed of

1 feed section,

2 washing and drying section,

3 transition and storage section,

4 light inspection section and spacer bar location section,

5 outside assembly section,

6 inside flat press section,

7 storage section.
This line is controlled by PLC and realizes the automatic control and frequency control of the motor speed of the whole line. It adopts advanced assembly technique and solves the problems of uneven press and misplacement of the glass. The assembly section adopts limit switch and cylinder tank whose travel distance can be adjusted, making the operation easy and the location precise and the movement reliable.

There are two operation methods in the control panel: 'automatic' and 'manual'. If the separate operation of each section or maintenance is needed, the 'manual' operation method is needed.

The structure and function of each section are as following.

Main Features

(1) Adopts the PLC to control the working condition,touch screen and man-machine interface.

(2)Low-e glass automatic diagnosis system

(3) Cleans coating glass and low-e glass

(4)Adopts no oil water-proof bearing in the washing section

(5) Conserves energy interrupted type automatic operation system

(6)Produce double glazing and triple glazing

(7)Hydrulic pressure provides power for plate press section,able to open the 450mm for maintenance.

Machine Parts

Main Features

This section can be opened to check and maintain. There

are lifting up device, avoid misplacement of two or three

glass, especially for big glass. There are straight line

guide rail, it can guarantee glass press parallel with high

accuracy.

Machine Parts

Name: Bliwing Cylinder
Brand: FESTO
Original: Germany
Domestic famous engines, strong driving force, low fuel consumption, high economic benefits 12F+4R sliding sleeve shift.

Main Features

Soft brush

It adopts custom-made and imported nylon, front is three pairs of soft brushes(Φ0.10mm), back is three pairs of hard brushes(φ0.15mm),it last the brushes life.

Main Features

Name: PLC
Brand: Omron
Original: Germany
PLC is the very important component in machine.We adopt the Omron PLC is very good and can give the order is very accuracy and science.It make sure the glass qulity.