environment protection Waste Engine Oil refining plant used black waste car motor oil to base oil refinery

Waste engine oil waste car motor oil refinery to base oil 

With the development of the economy, the demand for lubricants is also increasing, and the amount of used lubricating oil changed every year is also increasing. If these waste oils are thrown into the environment, they will cause serious environmental pollution. The industrialization of waste lubricating oil renewable resources belongs to the category of recycling of ecological resources in line with the national industrial policy and the requirements for the country to develop a recycling economy and protect the environment.

What are the finished products for plant refinery?

Commercial waste engine oil refinery equipment /waste car motor oil refining plant

Desalting and dewatering system

Generally, prilimilary desalting system is applicated to reduce the velocity of the crude oil. When necessary, the secondary desalting system is required. The water content will also be separated at this stage. This is an important process for later oil refining as pretreatment.

Pressure system

Pressure system for the separation of diesel systems, depending on the density and viscosity of diesel fuel, crude into light diesel oil, heavy diesel oil. The main component is C9-C22 alkane, cycloalkane, or an aromatic hydrocarbon.

Vacuum tower system

Depressurization system separated base oil component, three-side outlet fractionation to obtain oil base stocks of different viscosities. The main component C20-C40 paraffinic, naphthenic or aromatic hydrocarbons.

Atmospheric and vacuum furnace

The material is heated into the rectification column. The inner coil, can pass into the steam to prevent coking production.

Tubular Furnace(cupola)

This is a kind of vertical cylindrical furnace. The lower part of this furnace is the radiation chamber, vertical tube furnace is installed at the wall. Central is a convection chamber, a horizontal tube furnace is mounted at its inner part. The upper part of the furnace is a flue. And the lower center is mounted a mixing oil and gas burner. This device is for pre-treatment as well as gasoline and diesel separation.

Catalytic reforming system

In the presence of a catalyst, the process of rearranging the molecular structure of hydrocarbons in gasoline fractions to a new molecular structure is called catalytic reforming. It is a process naphtha obtained is converted into an aromatic hydrocarbon-rich, high-octane gasoline(liquefied petroleum gas and hydrogen as byproducts) when heating with catalyst in hydrogen pressure condition.

Pre-Sales Service

* Inquiry and consulting support.
* Flowchart and factory design.
* Factory and refinery on-site inspection.

After-Sales Service

* Training how to install and function the machine.
* Engineers available to service machinery overseas.
* 12 months warranty and life spand service available.