540L Tank Clean Car Radiator Industrial Ultrasonic Cleaner & Cleaning Equipment

540L Tank Clean Car Radiator Industrial Ultrasonic Cleaner & Cleaning Equipment

Ultrasonic Frequency Choices

Ultrasonic operating frequency is perhaps the single most important consideration when choosing an ultrasonic cleaning system. Each frequency has its own unique characteristics. Low frequencies are used for large, un-detailed parts with heavy contamination and produce un-even cleaning action in the fluid, while higher frequencies produce more evenly distributed cleaning action, and have the ability to penetrate small blind holes,

threaded areas, and other detail. More frequency choices 68kHz / 80kHz / 120kHz are available.

Choosing an ultrasonic frequency for a magnetostrictive system is easy, since there really is no choice at all. Magnetostrictive system designs typically operate at frequencies below 30kHz, making these systems unsuitable for most ultrasonic cleaning applications. Most parts being cleaned ultrasonically require the removal of lightly-bonded contaminants on the surface of precision parts, applications which are addressed

with 40kHz, 80kHz orCROSSFIRE Multiple Frequency Ultrasonics operating in this range. Low frequencies would produce in-consistent cleaning results on such parts, and parts may be damaged by cavitational erosion. Although Zenith manufactures 28kHz ultrasonic systems, they are rarely recommended for any ultrasonic cleaning applications, unless they are combined with 40kHz in a CROSSFIRE system. This is the direct result of the thousands of sample parts which have been test-cleaned ultrasonically at Zenith. Our Ultrasonic Testing Service is used to develop complete processes for our potential customers. Parts are submitted and tested in various ultrasonic frequencies and cleaning agents to determine the best process to use for a given application. Low frequency ultrasonic cleaning systems in the 25kHz-30kHz range never produce a better cleaning result than higher frequency systems do. In fact, it is exactly the opposite. Parts are cleaned more effectively in systems operating at 40kHz and above. Since these systems are less damaging to components, quieter in operation, and better at cleaning in fine detailed areas, these systems are usually recommended for any cleaning application.

Competitive Advantage:
 

1. Material : SUS304/316L with 2mm thickness
2. 15 years experience engineer will design the machine for you
3. Filtration System: for heavy duty oil removing, cycle cleaning solvent, prevent second polution and better cleaning effects.
4. PCB Board: manufactured by Skymen factory, more stable

Skymen JP Series:
 

Skymen 540L industrial ultrasonic cleaner as high quality Ultrasonic cleaning machine
Industrial High Sonic Power Ultrasonic Cleaning Machine
JP series single tank ultrasonic cleaner equipment system includes replaceable transducer box and generator. The transducer box and generator can be both build-in or separate but work together to operate ultrasonic cleaning process with transducer box immersible mounted in fluid tank, one side or both side or bottom mounted inside the tank. The number and placement of transducers is selected to give maximum results in any parts cleaning tank with any cleaning load. Specification of tank dimension and transducer boxes are custom made available. Either for mould of parts cleaning can receive perfect cleaning efficiency. Stainless steel basket is optional.

Application of Ultrasonic Immersible Transducer

immersible ultrasonic transducers This series of products is suitable to cleaning work pieces of various industries;such as plating components cleaning before plating,electronic,hardware machinery parts,clock and watch parts,semiconductor sillcon chips,glass vessels,bijouterie,spectacle frame, etc.

· Pre-plating cleaning for parts to be plated, oil and dirt removing for metal mechanical. Parts, cleaning semi-conductor Si-chips, spectacle frames and glass vessels.

· Lens, sunglasses, short-sighted mirror and prism, the microscope, camera, glass equipment, etc.

• electroplating accessories, watch & clock accessories, metal accessories, terylene filter core, semiconductor silicon, tools, lens, spectacle frames, jewelry and glass containers...etc.

Skymen 3 stage unit (multi-tank) ultrasonic cleaner machine

Why Choose ultrasonic cleaner?
Ultrasonic cleaner cleaning has been proven to be the most efficient method of removing contaminants, such as grease, oil, wax, fluxes, fingerprints, oxides and other deposits-from visible and invisible surfaces, holes and cracks. In general, if an item can be cleaned with liquid, it can be cleaned much faster and more thoroughly with an ultrasonic cleaner. In fact, it may not be possible to clean certain intricate and complex parts without the use of an ultrasonic cleaner.