Plastic recycling line used for plastic pet bottle scrap making machine

wood case for plastic bottle injection blowing machine

Semi automatic PET bottle blowing machine/ pet bottle blowing machine for 500ml

Suitable for manufacturing a variety of PET bottles:

mineral water bottles, edible oil bottles, soda bottles, medicine bottle, cosmetics bottles etc..Description

Specification:
semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from
50~2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle  cosmetics, wide-mouth bottle etc.

1.Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat  the perform ,the perform rotated and heated equally.

2.The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the  different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.

3.The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.

4.The machine can be operated in the step-by-step mode and the

semi-auto mode.

 

5.The machine is small with low investment, easy and safe to operate .

Model	MN-3L (One Blower & One Heater)
Clamping Force	100KN
Clamping Stroke	160 MM
Max. Stretching Stroke	360MM
Number of Cavities	2 Cavity
Theoretical Output	900 BPH(500ml)
Max. Mold Thickness	300MM
Voltage Standard	380v/3PH/50Hz or special order
Number of Heating Zone	4 Sections
Total Power (Full Loaded)	10KW
Max. Container Volume	2L
Neck Diameter Range	18-120mm
Max. Container Diameter	360mm
Max. Container Height	380mm
Low Air compressor	10Bar
High Air compressor	30-40Bar
Blow molding machine	1450*600*1700mm
Preform Heater	1800*700*1400mm
Net Weight	850kgs

Blowing mold