150-200 kg/h sunflower seed removing husk machine sunflower seed dehuller machine

Wooden packing

Product parameters

150-200 kg/h

300 kg/h

product information

The unit can complete the decontamination, shelling, dehulling, sorting and re-election of sunflower seeds in one time. It is the first choice for sunflower seed processing industry in the world. The unit has the characteristics of high shelling rate, small broken nut, high degree of automation and easy operation and maintenance.

The unit is mainly composed of 1 upper hopper, 2 raw material hoist, 3 multi-function removing machine, 4 bucket hoist, 5 double shelling machine main machine, 6 double sorting machine (3 sets), 7 picking hopper, 8 wind returning material. System, 9 centralized control cabinets.

At the end of the sunflower sheller, the processed sunflower raw material can be processed twice again, and the secondary unshelling of the undissected kernel is required, and the depacking rate of the equipment is as high as 94%. Sunflower seed equipment has automated program operation, energy efficiency, and efficiency, and is a must for sunflower seed processing. It is the equipment needed to process sunflower seeds into edible oil!

Environmental conditions of use of the equipment

Must be equipped with a 380 volt three-phase power supply, the voltage fluctuations do not exceed ± 10% of the rated value.

The room temperature is between -10 ° and 40 ° C. If the room temperature is lower than -10 ° C, the inverter may be damaged and the motor may not start normally.

There shall be no rain or snow in the factory building, the ground shall be smooth, clean, no sputum exists, and the aisle is unobstructed.

This equipment has no adverse effects on the environment and no harmful gas or liquid discharge.

Under the premise of ensuring product safety, quality and cost, using the company's research and development advantages in the production line and decades of professional experience in sheller production, through self-exploitation, continuously improve production and production processes, and constantly improve and innovate products, Strive to provide customers with quality products and services.

Technical service and after-sales

1. Provide relevant industry information free of charge.

2. Provide project analysis and feasibility report free of charge.

3. Provide free floor plan design and related equipment configuration.

4. Free technical and business site Q&A.

5. Free standardized training for user operations and maintenance personnel.

6. Free installation and commissioning of equipment and guided training.