Glass fiber sand pipe Glass Fiber Reinforced Plastic Sand Pipe Dewatering Pipe

GRP sand pipe edit discussion

This entry lacks an overview image, so add relevant content to make the entry more complete and can be quickly updated. Edit now!

Fiberglass pipe can resist the long-term erosion of various acid, alkali, salt, organic solvent, seawater, sewage and other chemical medium.According to different types of media and the use of temperature can choose different performance of the pipeline.

FRP pipe with sand in it can resist a variety of acid, alkali and salt long-term erosion mechanical properties improve pipe stiffness point designability is good, suitable for a wide straight diameter DN300 mm -DN4000 mm stiffness grade 2500N/㎡, 5000 N/㎡

directory

1 product features

2 product specifications

3 main raw materials

4. Main molding process

5 connection mode

6. Product inspection standards

Main application fields

Product features editor

Excellent mechanical properties

With small proportion (1.8~2.1g/ ★ g/ ★ 3) and high strength (≥300MPa), GFRP pipes have a much higher specific strength than steel pipes and cast iron pipes. With the addition of resin mortar in the middle layer of the pipe wall, GFRP pipes can greatly improve their rigidity and are suitable for laying in all kinds of soil environment and sea bottom.

Excellent hydraulics

The inner surface of the fiberglass pipeline is very smooth with low friction resistance (n≤0.0084), which can significantly reduce the pressure loss along the pipeline and increase the flow rate. In the case of the same flow rate, smaller pipe diameter or power transfer pump can be selected, thus reducing the initial investment of the project and energy consumption (reducing the operating cost).

◎ good designability, wide range of adaptation

FRP pipes with different pressure levels and special properties can be made by changing the material selection, winding Angle and layering design to meet different working pressure, medium, stiffness (or embedding depth) requirements.

◎ antifouling, non-toxic

Smooth inner wall does not scale, do not breed algae and other microorganisms, no secondary pollution to water quality.Pipes made of food grade resin can be used to transport drinking water.

◎ less joints, good sealing

The single length of FRP pipe is generally 12 meters, using double "O" sealing ring socket connection, each interface can be tested pressure, sealing reliable.

◎ light weight, easy to transport and install

The weight of GFRP sand pipe is only 1/4 of ductile iron pipe of the same specification and length, and 1/10 of cement pipe.Convenient transportation and loading and unloading, high installation efficiency and low cost.

Product specification editing

(1) diameter: DN300 mm -DN4000 mm (2) pressure grade: 0.25mpa, 0.6mpa, 1.0mpa, 1.6mpa, 2.0mpa, 2.5mpa

(3) single root length: 3 m, 6 m, 9 m, 12m (4) stiffness grade: 2500N/㎡, 5000 N/㎡, 10000 N/㎡

Note: other pressure grade, stiffness grade and length specification pipes can also be produced according to customer requirements.

Main material editor

(1) resin: resin with different properties can be selected according to different requirements. (2) continuous glass fiber (3) quartz sand (4) glass fiber blanket, etc

Mainly edit molding process

Our company adopts the international advanced level of computer control continuous glass fiber winding molding process, according to the design procedure on the core mold successively make lining layer, inner structure layer, resin mortar layer, outer structure layer, outer protective layer, and through the far infrared ray baking plate for heat treatment, after curing according to the standard of hydraulic test.

Connection mode editing

Double "O" sealing ring socket connection, single "O" sealing ring socket connection, butt joint and socket bonding, flange connection, etc

Edit product inspection standard

Make and accept awwa-c950, JC/ t838-1998 and CJ/ t3079-1998