Self-aligning Ball Bearings 1214 2214 1215 2215 1216 2216 1217 2217 1218 2218 1219 2219 1220 2220 1222 2222

Emailbearing：@anshu-electromech.com

The self-aligning ball bearing is a bearing with spherical balls and a centering function between the inner ring of the two raceways and the outer ring of the spherical race. The radial load capacity is large, and it is suitable for heavy load and impact load. The self-aligning ball bearing cage is made of steel plate or synthetic resin. The characteristic is that the outer ring raceway has a spherical shape and has self-aligning property, but the relative inclination of the inner and outer rings must not exceed 3 degrees. The inner diameter of the self-aligning ball bearing is cylindrical or conical. The conical inner bore has a taper of 1:1 2 or 1:30. In order to enhance the lubrication performance of the bearing, an annular oil groove and three oil holes are machined on the outer ring of the bearing. Self-aligning ball bearings with dust caps and seals are filled with the right amount of grease. They should not be heated or cleaned before installation. No lubrication is required during use. Adapt to operating temperature - 40 °C to + 120 °C. between.