Factory supply mold incubator WS-250MJ，Plant cell seed mold culture, reliable quality

Factory supply mold incubator WS-250MJ，Plant cell seed mold culture, reliable quality.

 Before starting the device for the first time, please follow the following procedures:

1. Take out the shelf and other accessories inside the equipment.

2. Wipe the inner wall of the cabinet with soaked alcohol gauze for disinfection, and then wipe the alcohol clean with dry gauze.

3. Put the shelf into the equipment according to your experiment requirements.

4. The water tank should be placed on the top of the equipment before use, then the water pipe should be inserted into the inlet and overflow port on the left side of the equipment (refer to the component composition drawing), and the water tray should be placed under the outlet of the overflow pipe for use.

5. Fill the tank with enough pure water.

Notice ：this equipment has low temperature auto-defrost function, it is normal that there is fluctuation when low temperature auto-defrost 

Complaint:service@kentonchina.com

E-mail : kenton@kentonchina.com

Mold incubator:

/Microbial-incubator/20170527/8.html